23501
16
Zoom out
Zoom in
Previous page
1/28
Next page
12
Controls and Functions
DSP with 256 presets. The presets are organized in sixteen
Program banks, each with sixteen variations. The Variation
control knob is used to select one of the sixteen variations
for each of the sixteen DSP effect Programs.
38 - PEAK (DSP INPUT) LED
LED indicator illuminates when the input signal to the
internal DSP is reaching a clipping level.
39 - DSP MUTE switch
This switch is used to turn the internal DSP effects on and
off. When the DSP MUTE switch is pressed in, the internal
DSP effects are turned off and when the switch is pressed
out, the DSP effects are on.
2 TRACK INPUT AND OUTPUT
The MDR1248 and MDR1688’s 2 Track section provides the
connections for playback and recording for an external
device such as a DAT, cassette recorder, CD or Mini Disk.
Main Mix Assign Switches
The next two switch functions are used to select addition-
al sources that can be combined with the Main Left and
Right mix and sent to the main Left and Right Outputs.
40 - ALT 4/3 TO MIX switch
The ALT 3/4 TO MIX switch is used to assign the ALT 3/4
mix bus to the MAIN mix bus. If you push the ALT 3/4 TO
MIX button, all the channels with their ALT 3/4 switch
pressed in will be routed to the left and right MAIN out-
puts and the level will be controlled by the 3/4 LEVEL con-
trol knob and MAIN LEVEL fader.
41 - 2TK TO MIX switch
The 2TR TO MIX switch is used to assign the 2TR input to
the MAIN mix bus. If you push the 2TR TO MIX button, the
signal present at the 2 TRACK IN will be routed to the left
and right MAIN output and the level will be controlled by
the 2TK LEVEL control knob and MAIN LEVEL fader.
Control Room and Headphone Assign Switches
The next three switch functions are used to select addi-
tional sources that can be heard in the headphones and
sent to the Left and Right Control Room Outputs.
42 - MAIN MIX switch
The MAIN MIX switch routes the Left / Right MAIN mix bus
to the CONTROL ROOM / PHONES outputs. Use the Left /
Right MAIN MIX Level faders (48) and PHONES level fader
(49) to set the volume.
43 - ALT 3/4 switch
The ALT 3/4 switch routes the 3/4 mix bus to the CONTROL
ROOM / PHONES outputs. Use the ALT 3/4 LEVEL control
knob (32) and PHONES level fader (49) to set the volume.
44 - 2 TK IN switch
The 2TR IN switch is used to assign the 2TR input to the
Control Room output. If you push down the 2TK IN button,
signal will be routed into the left and right Control Room
MASTER SECTION (continued)
output and will be adjusted by the CR / PHONES control
fader.
45 - Phantom Power LED
This LED illuminates indicating that the 48 volt phantom
power is applied to the microphone pre-amps enabling
use with condenser microphones. The +48V LED will light
up when the Phantom Power switch (located on the rear
panel) is switched to the ON position.
46 - POWER LED
The Power LED lights up to indicate that the main POWER
switch (located on the rear panel) is on.
47 - Output Level Meters
The OUTPUT LEVEL METERS allows you to monitor the
level of the signal which is being sent to the MAIN MIX
jacks.
48 - MAIN MIX - Fader Control
The master MAIN controls are the overall volume controls
for the left and right mix bus. These line level signals are
output from the MAIN MIX jacks.
49 - PHONES / CR
The PHONES / CR control is used to set the level sent to the
control room outputs, and also to the headphone jack.
NOTE: To avoid distortion, adjust the Main Level control so
that the 0 indicator LED lights occasionally.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MDR1688 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MDR1688 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson MDR1688

Samson MDR1688 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info