23501
13
Zoom out
Zoom in
Previous page
1/28
Next page
9
in any optional headphones plugged in to the PHONES
connector located in the front panel jack field. If the
AFL/PFL MODE switch, located in the master section, is
switched out, the signal is sent pre fader, so you can hear
the signal regardless of the position of the channel vol-
ume Fader. This allows you to listen to a channel by itself:
(let's say) to see if an artist is out of tune, or to cue up a
channel without having to play it through the main PA
speakers. If the AFL/PFL MODE switch is switched in, the
signal is sent post fader, the signal you hear is dependant
on the position of the channel volume Fader. This allows
you to hear if there is any distortion on a channel added
by the level of the channel fader.
11- SOLO LED
The MDR1248 and MDR1688’s Mono Input channels
include a SOLO LED which, when illuminated, indicates
that the signal is assigned to the SOLO bus.
12 - PEAK LED
The MDR1248 and MDR1688’s MIC/LINE pre-amp also
includes a PEAK LED which, when illuminated, indicates
that the signal is peaking or overloading. To reduce dis-
tortion, lower the GAIN control to keep this LED from stay-
ing on.
13 - CHANNEL LEVEL
The MDR1248 and MDR1688’s LEVEL control knobs are
used to adjust the overall channel volume.
STEREO INPUT CHANNEL SECTION
The MDR1248 and MDR1688 feature stereo input chan-
nels for connected stereo line level devices like keyboards
and drum machines, as well as the outputs from effects
processors and digital guitar modelers. The MDR1248 has
four sets of stereo inputs which make up channels 5/6,
7/8, 9/10 and 11/12, while the MDR1688 has four sets of
stereo inputs which make up channels 9/10, 11/12, 13/14
and 15/16. The Stereo input channels have a four-band
fixed equalizer and AUX 1 and 2 sends and are laid out the
same as the mono inputs. The following section details
the stereo input controls:
14- GAIN switch
The MDR1248 and MDR1688’s pre-amp stage has a vari-
able GAIN switch with a range of -10 to +4dB on the ste-
reo LINE input.
15 - LOW/LOW MID/HIGH MID/HIGH - Channel
Equalizer
The MDR1248 and MDR1688 Stereo input channels fea-
ture a 4-band equalizer allowing you to adjust the high,
mid, and low frequencies independently on each channel.
The stereo channel equalizer is laid out like a mono input
on the control panel input strip, but internally, the equal-
izer is effecting a stereo signal path. The channel’s fre-
quency response is flat when the knobs are in the “12:00”
position. Rotating the knob towards the right will boost
the corresponding frequency band by 15dB, and rotating












Controls and Functions
it towards the left will cut the frequency by 15dB. The fre-
quency centers, range of boost or cut, and equalizer type
for each band are as follows:
High: 12kHz +/- 15dB shelving type
High Mid: 3kHz +/- 15dB peaking type
Low Mid: 500Hz +/- 15dB peaking type
Low: 80Hz +/- 15dB shelving type
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MDR1688 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MDR1688 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson MDR1688

Samson MDR1688 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info