24757
19
Zoom out
Zoom in
Previous page
1/32
Next page
17
1/2
OUTPUT
In a live sound application, the 1/2 bus outputs are con-
nected to a power amplifier or powered speakers. In a
recording application, the
1/2
outputs are used to con-
nect a stereo device such as computer sound card, DAT,
or cassette recorder.
3/4 OUTPUT
In a live sound application, the 3/4 bus outputs are con-
nected to a power amplifier or powered speakers. In a
recording application, the 3/4 outputs are used to con-
nect a stereo device such as computer sound card, DAT,
or cassette recorder.
Aux RET 1 LEFT/RIGHT
The Aux RET 1 LEFT/RIGHT are stereo inputs that are generally used to connect the outputs of an effects processor, but can
also accept the signal from any line level source like a keyboard, recorder and even another mixer. The signal connected to the
Aux RET 1 LEFT/RIGHT will feed the main LEFT/RIGHT MIX bus. The overall level is controlled by the Aux RETURN 1 knob located
in the master section on the front panel
Aux RET 2 LEFT/RIGHT
The Aux RET 2 LEFT/RIGHT are stereo inputs that are generally used to connect the outputs of an effects processor, but can
also accept the signal from any line level source like a keyboard, recorder and even another mixer. The signal connected to the
Aux RET 2 LEFT/RIGHT will feed the main LEFT/RIGHT MIX bus. The overall level is controlled by the Aux RETURN 2 knob located
in the master section on the front panel
MONO OUTPUT
The Left and Right Mix outputs are summed together and sent to the MONO output. The level of the Mono signal can be
adjusted using the MONO OUT level control located just below the connector and used to feed a speaker zone in a fixed instal-
lation.
LEFT/RIGHT MIX
In a live sound application the LEFT/ RIGHT MIX outputs are connected to a power amplifier or powered speakers. In a record-
ing application, the LEFT/ RIGHT MIX outputs are used to connect a stereo device such as computer sound card, DAT, or cas-
sette recorder.
AUX 1 Output
The signal present at the AUX 1 output is sent from the AUX 1 bus, which is fed from the AUX 1 send on the input channels. The
AUX 1 output can be used as the MONITOR MIX bus in a live sound situation by connecting the output to a power amp and
monitor speaker.
AUX 2 OUTPUT
The AUX 2 output is used to send a signal to an external signal processor such as a delay or reverb. The signal present at the
AUX 2 output is sent from the AUX2/DSP bus, which is fed from the AUX2/DSP send on the input channels.
CONTROL ROOM LEFT/RIGHT
The Control Room outputs are used to connect a studio monitor system. The Control Room outputs have the same output as
the L/R MIX, however, the level can be adjusted independently from the main mix using the C ROOM/HEADPHONES control.
INSERT- Bus 1/2
Send and return patch point on TRS (TIP/RING/SLEEVE) jack for interfacing external effects processors on bus 1/2.
INSERT- Bus 3/4
Send and return patch point on TRS (TIP/RING/SLEEVE) jack for interfacing external effects processors on bus 3/4.
INSERT- Left and Right Mix Bus
Send and return patch point on TRS (TIP/RING/SLEEVE) jack for interfacing external effects processors onLeft and Right MIX bus.
MDR16 Input and Output Connections
EXTERNAL OUTPUT JACKS
The MDR16 features several output connectors allowing you to interface a variety of external devices. A stereo recording device such
as a cassette recorder can be connected to the 2 Track jacks, and power amplifiers can be connected to the CONTROL ROOM and
MAIN output jacks.
6
7
8
9
10
11
12
13
















 


14
15
16
17
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MDR16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MDR16 in the language / languages: English as an attachment in your email.

The manual is 12,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info