624007

Samson L3200 Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
8
STEREO AUX RETURN Input
The L Series feature two additional STEREO AUX RETURN
inputs that can be used to return the outputs of the an
external effects processor, or to connect the output of
any stereo line level device. The STEREO AUX RETURN can
be routed to the MAIN mix, or to a pair of AUX outputs,
allowing you to send the signal to a monitor mix.
35 - AUX 1/AUX 3 - control knob
Each of the L Series STEREO AUX RETURN include an AUX
1 / AUX 3 control knob, which controls the amount of that
AUX RETURN’S signal that is sent to the AUX output. Use
the SHIFT switch (38) to select between AUX 1 and AUX 3.
The signal feeding AUX 1 / AUX 3 is sent before, or pre, the
channel Level control, so the channel Level has no effect
on the AUX 1 and AUX 3 level.
36 - AUX 2/AUX 4 - control knob
Each of the L Series STEREO AUX RETURN include an AUX
2 / AUX 4 control knob, which controls the amount of
that channel’s signal that is sent to the AUX output. Use
the SHIFT switch (38) to select between AUX 2 and AUX 4.
The signal feeding AUX 2/AUX 4 is sent before, or pre, the
channel Level control, so the channel Level has no effect
on the AUX 2 and AUX 4 level.
37 - MAIN – control knob
The L Series’ STEREO AUX RETURN MAIN control knob
is used to adjust the overall level of the STEREO AUX
RETURN to the MAIN left and right bus.
38 SHIFT - switch
You can use the SHIFT switch to select which pair of AUX
buses the STEREO AUX RETURN will feed. When the SHIFT
switch is in the up position, the STEREO AUX
RETURN feeds AUX1 / AUX2. When the SHIFT switch is in
the down position, the STEREO AUX RETURN feeds AUX3
/ AUX4.
39 - PFL switch
The STEREO AUX RETURN’s PFL, or Pre Fader Listen switch,
allows you to listen to, or “solo”, the STEREO AUX RETURN
in the headphones. When the stereo input channel’s PFL
switch is pressed down, the STEREO AUX RETURN signal is
assigned to the solo bus and can be heard in headphones
plugged in to the PHONES connector located in the front
panel jack field. Since the signal is sent pre fader, you can
hear the signal regardless of the position of the channel
Level control. This allows you to listen to a channel by
itself: (let's say), to check the reverb decay time, or to cue
up an echo without having to play it through the main PA
speakers.
40 -CD/TAPE – control
The L2400 and L3200 have a dedicated line level CD/TAPE
LEVEL input to connect a CD, Tape or MP3 player. The
CD/TAPE Level control is used to adjust the volume of the
signal connected to the CD/TAPE input.
41 - PFL switch
The CD/TAPE input channel’s PFL, or Pre Fader Listen
switch allows you to listen to, or “solo”, the CD/TAPE input
in the headphones. When the CD/TAPE input channel’s
PFL switch is pressed down, that channel’s signal is
assigned to the solo bus and can be heard in headphones
plugged in to the PHONES connector located in the front
panel jack field. Since the signal is sent pre fader, you can
hear the signal regardless of the position of the channel
Level control. This allows you to listen to a channel by
itself: (let's say), to cue up a song on a CD player without
having to play it through the main PA speakers.
PFL
STEREO
AUX RETURN
MAIN
AUX 1
SHIFT
1
AUX 2
35
38
39
36
37
Controls and Functions
LEVEL
PHONES
42
43
PFL
DEFEAT
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson L3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson L3200 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info