624006
21
Zoom out
Zoom in
Previous page
1/28
Next page
17
Getting Started with MAC OS X - continued
5. Next, click in the Output tab and select USB Audio
Codec (figure 11). You may notice that the Volume
slider sets itself to the full level. This will allow you
to have full range using L Series’ hardware MAIN
Volume control.
At this point you can begin using your L Series console
with most any audio recording software, but you need
to select it as an input and output device within the
DAW. When selecting the inputs and outputs just look
for and select the USB Audio Codec.
Recording from the L Series’ USB I/O
For recording a live performance, you can send the
MAIN Left and Right mix signal to the USB out for
recording exactly the same mix as you hear in the
sound system.
Be sure that the USB SEND switch is set to MAIN (up
position) to send the MAIN Left and Right mix to the
USB input.
The USB I/O is always active and it will send a stereo
signal based on the position on the USB SEND
switch. When the USB SEND switch is set to MAIN,
the signal sent to the computer will be comprised
of the input channels that are assigned to the MAIN
Left and Right Bus. The mix level follows the channel
FADER and the stereo image set by the channel’s
PAN control.
Figure 11
You can also assign the USB out to feed from the
AUX1 and AUX2 outputs enabling you to build a
stereo mix for recording that’s independent from
the house sound system.
Press the USB SEND switch down to send the AUX1
and AUX2 mix to the USB input.
Playing Back From the L Series’ USB I/O
Press the USB MONITOR switch down if you want to
hear the USB playback in the headphones.
For playback, you can return the USB stereo signal
directly into the Main left and right mix bus so that
the playback from the PC sums with the MAIN mix
on the console.
You can also use the USB RETURN switch TO route
the signal from the USB output to the last stereo
channels.
To hear the USB playback in the MAIN mix, be
sure that the USB SEND switch is set to MAIN (up
position).
For added flexibility, you can assign the USB stereo
playback signal to the last stereo channels (23/24
on the L2400 and 31/32 on the L3200). This gives
you the ability to mix the signal in the MAIN mix,
and also, you can assign to the Auxiliary sends and
Bus outputs so you can mix the playback in floor
monitors or isolate the playback to a mix zone.
Press the USB RETURN switch down to return the
USB input to the last stereo input.
Using the USB I/O
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson L2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson L2400 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info