624004
11
Zoom out
Zoom in
Previous page
1/24
Next page
7
Master Auxiliary Send Section
Each of the L Series AUX buses and the EFX bus have a
master control knob, which is used to adjust the overall
level of that AUX bus output.
24 - AUX 1 Master Send
The Aux 1 signals from mono and stereo input chan-
nels, along with the DSP returns are mixed together
and sent to the AUX 1 Output. Use the AUX 1 level
controls to set the amount of signal being sent to
Aux 1 Output.
Controls and Functions
24BIT DIGITAL EFFECT SECTION - continued
22 – TO AUX 2 - Effects Return Control
The TO AUX 2 control is used to adjust the level of the
effects from the built-in digital Multi-effect being that’s
being sent to the AUX 2 monitor bus. This allows you
to add the DSP effects to the signal in your monitor
speakers. Turn this knob up if you want to hear the effect
in the AUX 2 monitor mix.
23 - TO AUX 1 - Effects Return to Aux 1 control knob
The TO AUX 1 control is used to adjust the level of the
effects from the built-in digital Multi-effect that’s being
sent to the AUX 1 monitor bus. This allows you to add the
DSP effects to the signal in your monitor speakers. Turn
this knob up if you want to hear the effect in the AUX 1
monitor mix.
25 - AUX 2 Master Send
The Aux 2 signals from mono and stereo input chan-
nels, along with the DSP returns are mixed together
and sent to the AUX 2 Output. Use the AUX 2 level
controls to set the amount of signal being sent to
Aux 2 Output.
26 - AUX 3 Master Send
The Aux 3 signals from mono and stereo input chan-
nels, along with the DSP returns are mixed together
and sent to the AUX 3 Output. Use the AUX 3 level
controls to set the amount of signal being sent to
Aux 3 Output.
27 - EFX Master Send
The EFX signals from mono and stereo input chan-
nels, along with the DSP returns are mixed together
and sent to the internal DSP and the EFX Output.
Use the EFX level controls to set the amount of sig-
nal being sent to the internal DSP and the EFX Send
jack.
28 - STEREO RETURN – control knob
The L Series feature an additional STEREO RETURN input
that can be used to return the outputs of the an external
effects processor, or to connect the output of any stereo
line level device to the main mix
29 -CD/TAPE – control
The L1200 and L2000 have a dedicated line level CD/TAPE
LEVEL input to connect a CD, Tape or MP3 player. The
CD/TAPE Level control is used to adjust the volume of the
signal connected to the CD/TAPE input.
30-MUTE CHANNELS – switch
You can turn all the Mic/Line channels with a press of a
single button using the MUTE CHANNELS switch. This is
especially convenient when you take a break and want to
leave all the levels set so they are ready when you begin
to use your PA system again. The MUTE CHANNELS does
not turn off the stereo channels, and does not turn off the
CD/TAPE inputs. So, when the MUTE CHANNELS switch is
on, you still have stereo returns for a CD or MP3 player.
24
25
26
27
28 29 30
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson L1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson L1200 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson L1200

Samson L1200 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info