630026

Samson Graphite M25 Manual

9
Zoom out
Zoom in
Previous page
1/52
Next page
Graphite M25 · USB Keyboard Controller
9
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
7. PAD Bank Button - The Trigger Pads are configured into two pad banks, with different set-
tings configured to each pad. Press the PAD button to toggle between the two banks.
8. OCTAVE +/– Buttons - Press the OCTAVE buttons to shift the octave of the keyboard up or
down a maximum of four octaves, to extend the range of the keyboard. Each time you press
the OCTAVE button, the range of the keyboard shifts up or down 12 notes. The buttons
blink progressively faster as the keyboard’s octave shifts in each direction. Press both but-
tons to set the keyboard to the default range.
9. SUSTAIN Button - Press this button to sustain (hold) currently held notes. Release the but-
ton to stop notes from being held.
10. Master Encoder - This continuous encoder sends continuous control data. The Master En-
coder is preset from the factory to send volume messages on MIDI channel 9. The encoder
can be assigned to control different parameters using the computer editor.
11. PITCH BEND Ribbon Strip - Slide your finger to raise or lower the pitch of notes played on the
keyboard.
12. MODULATION Ribbon Strip - Slide your finger to send modulation messages. Modulation is
usually used to add vibrato or other expressive effects to a sound being played.
13. Function Keys - In PROG mode, the last 11 keys of the keyboard are assigned to numerical
digits (0–9), and ENTER. To Send a program change message, press the PROG button,
then enter the program number by pressing the numbered keys. When the program number
is entered, press the ENTER key to transmit the program number information. The Graphite
M25 will exit the program mode, and the Function keys will transmit note information.
14. USB Connection - Connect the included USB-mini cable from this port to the USB connec-
tion on a computer to provide power to the keyboard, as well as to send and receive MIDI
data.
Front Panel Controls and Functions
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Graphite M25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Graphite M25 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info