Manual Samson Graphite 49 (page 16 of 164) (English, German, French, Italian, Spanish)

630030

Zoom out

Zoom in

1/164

Preset Mode

To select a preset, press the PRESET button and the

keyboard will enter Preset Mode. The Preset indicator will

light red, and the Preset number will ash on the display.

In Preset Mode, the Graphite 49 will stop transmitting

MIDI messages.

Use the DATA +/– buttons or numerical keys to select the

desired Preset. The name of the Preset will appear in the

rst row of the display. Press the ENTER button to conrm your choice, and the keyboard will load

the new Preset settings for all sliders, knobs and buttons. Pressing the MAIN button will cancel

the selection and return to the previous Preset. There are 3 categories of presets:

GRAPHITE Preset

Preset 1 is congured for the sliders to control channel volumes, and the encoders to

control the pan for channels in Zone 1. Using this preset will get you started working

with almost any standalone USB/MIDI device or audio software.

You can edit the Preset for each component in Setup Mode, and save your changes. The

settings for sliders S1–S9 and encoders E1–E8 can be organized into two banks, which

can be accessed by pressing the BANK ◀ or ▶ buttons. The active MIDI channels for all

encoders and sliders can be shifted up or down by pressing the CHANNEL ◀ or CHAN-

NEL ▶ buttons.

Remote Control Presets

Presets 2–10 are designed for specic software titles, with the controls set to access the

most common functions directly from the Graphite 49. The communication between

the computer and the keyboard is bidirectional, and information from the software will

appear on the Graphite’s display. You can edit the Presets in Setup Mode and save your

changes to further customize the parameters to suit your needs.

Sliders S1–S8 are used for channel volume controls; S9 is used for master volume con-

trol. Encoders E1–E8 are used for channel pan control. F1–F8 are used for channel Solo; 

F9–F16 are used for channel Mute for all software (except Logic where F1–F8 are used

for REC Arm, and F9–F16 are used for channel Mute). The BANK and CHANNEL buttons

are used to change the channels controlled within the software. The remote control

message is sent through output Port 5 to the computer, and the message from the

computer is received through input Port B of the keyboard.

Note: When you move slider on the computer, its data will be sent to the keyboard in real

time, and it will be shown on the display, but it cannot aect the physical position of the

slider in the keyboard. When you move the slider on the keyboard, the message will not be

transmitted until it reaches the value and position of the slider in the software. This elimi-

nates any unexpected level jumps when the faders are moved.

USER Presets

Presets 11–30 are USER presets that can be fully customized to create your layout. The

default settings for each USER preset is the same as in Preset 1.

The USER Preset also includes information about the contents of settings, for all zones,

and activity status. Zone edit results are saved to the current activated Preset automati-

cally.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samson Graphite 49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samson Graphite 49 Manual

Product: