630024
19
Zoom out
Zoom in
Previous page
1/36
Next page
19
Graphite 25 · USB/MIDI Keyboard Controller
Selecting Velocity Curve for the Trigger Pads
Press the Pad Vel key to select a velocity curve for the trigger pads. “P.Curve will appear in the Op-
eration area of the display with its current velocity curve number in the data area . The Operation
area will then change to show the current velocity curve. Use the DATA +/– buttons or enter the
number by pressing the numerical keys on the keyboard. Press the ENTER key or the ENTER but-
ton to conrm your setting and save it. The name of the velocity curve will be updated. The value
display will stop blinking. Selectable curves are the same as keyboard velocity curves.
Switch the Local Control
The USB out from port 1 or 2 can be transmitted through the MIDI Out jack. This is controlled
by the local setting. Press the Local key to switch the local control On/O. “Local” and its current
status will appear in the Operation area of the display, and ash. Press the DATA + (or numerical
key 1) to turn Local Control on and DATA – (or numerical key 0) to turn Local Control o. Press the
ENTER key or the ENTER button to conrm your setting and save it. When local is on, “Local” will
appear in the Status Indicator area on the right side of the screen.
Pedal Setup
Press the pedal to assign a control code for the pedal. “Pedal” will appear in the Operation area of
the display with the value of the current control in the data area. The value is also shown and will
blink under the Val tag on the second row of the display. Use the DATA +/– buttons to change the
value or enter the data by pressing the numerical keys on the keyboard. Press the ENTER key or
the ENTER button to conrm your setting and save it. The value display will stop blinking.
Preset Reset
Press the Preset key to reset to the factory default setting. “Reset No” will appear in the Operation
area of the display and “No” will blink. Press DATA + (or numerical key 1) to switch it to Yes” or
DATA – (or numerical key 0) to switch it “No. Press the ENTER key or the ENTER button to conrm
your decision. When the Yes is conrmed, the Reset sign will appear in the Status Indicator area
on the right side of the screen and “Loading… will appear in the Operation area of the display.
After the reset is nished, the display will show “Reset OK”.
Mute Control
Messages for the operations of the encoders and slider are normally transmitted immediately
with movement of the controller. You can set the Graphite so that it transmits all encoder and
slider movements simultaneously. This is controlled by the MUTE setting. Press the Mute key to
switch the mute control On/O. “Mute and its current status will appear in the Operation area of
the display and ash. Press DATA + (or numerical key 1) to turn Mute Control on and DATA – (or
numerical key 0) to turn Mute Control o. Press the ENTER key or the ENTER button to conrm
your setting. When mute is on, “Mute” will appear in the Status Indicator area on the right side of
the screen.
Setup Mode
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Graphite 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Graphite 25 in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info