630024
9
Zoom out
Zoom in
Previous page
1/36
Next page
9
Graphite 25 · USB/MIDI Keyboard Controller
1. Display - The backlit LCD is the command center for the Graphite 25. It displays the current
setup information, performance data, adjustable parameters and controller information.
2. PAGE / Buttons - Press the PAGE buttons to navigate through the adjustable param-
eters and functions in all modes.
3. DATA +/– Buttons - Press the DATA buttons to adjust MIDI, controller, and performance data
in all modes.
4. ENTER Button - When pressed, this button applies the selected parameter settings.
5. SETUP Button - Press this backlit button to enter Setup Mode to adjust and assign perfor-
mance and controller parameters within a preset.
6. ZONE Button - Press this backlit button to edit the three zones from which the Graphite can
send independent note and controller information.
7. PRESET Button - Press this backlit button to enter Preset Mode, where you can select from
30 dierent software and user presets.
8. MAIN Button - Press this backlit button to enter Performance Mode. It will also cancel any
adjusted parameters that have not been saved.
9. CHANNEL / Buttons - When preset No. 1 or any User preset is selected, pressing the
CHANNEL buttons will shift the eight encoders and four function buttons by one MIDI
channel to expand the working range of the controllers. When a software control preset is
selected, the channel command is processed by the software.
10. BANK / Buttons - When preset No. 1 or any User preset is selected, pressing the BANK
buttons will shift the eight encoders and four function buttons through four banks, allowing
48 individual parameters to be assigned. When a software control preset is selected, the
channel command is processed by the software.
11. Assignable Encoders - The eight endless encoders send continuous control data via the
USB or MIDI OUT jacks. The encoders E1–E4 are preset from the factory to send MIDI pan
messages on channels 1–4; the encoders E5–E8 are preset from the factory to send volume
messages on channels 1–4. The encoders can be assigned to control dierent parameters in
Setup Mode.
12. Function Buttons - The four function buttons can be used to send MIDI note or control
information, and can be set as either toggle or momentary style buttons. The current state of
each button is shown on the display.
Front Panel Controls and Functions
+/-
Local
Mute
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Graphite 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Graphite 25 in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info