623997
11
Zoom out
Zoom in
Previous page
1/112
Next page
11
XP1000 • Portable PA System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
XP1000 Mixer Layout
frequency response, or tone contour, for the XP1000 sound system. If your appli-
cation is mainly for music, press the switch down to select the MUSIC response
curve. If your application is mainly for spoken word, leave the switch up to select
the SPEECH response curve.
15. Pairing Indicator - Displays the Bluetooth
status of the XP1000 system.
16. Pairing Button - Press this button to enable discoverable mode in order to pair with a
Bluetooth audio device.
17. MONITOR level knob - The MONITOR level control is used to control the overall level
sent to the MONITOR OUT.
18. Effects Program (PROG) selector - This control knob is used to select one of 16,
24-bit DSP effects programs.
19. Effects SEND knob - The SEND knob is used to adjust the total amount of effects
added to any channel that has its EFFECTS switch (see #6) pressed down.
20. MASTER knob - The MASTER volume knob controls the overall output level. This
knob determines the final output signal level. Signals from all ten channels are
routed here just before being routed to the built-in power amplifiers and Left and
Right speaker output jacks (see #11).
21. METER LED indicators - This six-segment bar meter shows the XP1000’s output level.
For optimum signal-to-noise ratio, set the VOLUME control so that program material
is usually at or around +3 to +6 VU, with occasional, but not steady excursions to
the red “LIMITER” segment.
22. READY indicator - The indicator will illuminate when the power switch is turned on
and the unit is ready to pass audio.
23. PHANTOM switch - The XP1000 features an onboard phantom power supply to oper-
ate condenser microphones. When the switch is engaged, the LED will illuminate
indicating that phantom power is now available on the microphone pre-amps.
IMPORTANT NOTE: To avoid a loud pop, be sure to turn down the MASTER level
control before plugging and unplugging the mic cables when the phantom power is
active.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Expedition XP1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Expedition XP1000 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 16,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info