Manual Samson Expedition Pro XP 200 (page 5 of 60) (English, German, French, Spanish)

629790

Zoom out

Zoom in

1/60

System Features

The Samson Expedition Pro system uses state-of-the art

technology to bring a revolutionary new degree of flex

ibility and portability to professional audio. Its main fea

tures include:

• A built-in telescoping handle and locking wheels that

make it easier than ever before to transport your audio

system.

• All Expedition Pro enclosures are lightweight and com

pact yet exceptionally durable and roadworthy.

Injection-molded with Polypropylene, they feature sub

stantial internal bracing to support a nearly 1/2" thick side

wall construction, making them strong and rigid enough

to allow maximum energy to be delivered to the sound

output. In addition, a steel grill and scuff-resistant

textured finish makes for a rugged speaker enclosure

that will deliver dependable performance in even

the most demanding environments.

• The low frequency section includes a custom designed

Kevlar-impregnated 12" low frequency driver with a

2.5" Kapton Former voice coil and 50 ounce barium fer

rite magnet for accurate and super-tight bass response.

• A high frequency section that delivers clear, sweet top

end thanks to its 1" compression driver with a specially

designed phenolic diaphragm, along with a phasing plug

for linear response and an elliptical wave guide horn

design that reduces nearly all sonic diffraction.

• A tilt position that allows the Expedition Pro to be used

as an onstage wedge monitor.

• Integral 1 3/8" pole-mount receptacle and convenient

fly points allow the Expedition Pro to be pole-mounted or

“flown” using standard PA hardware.

• The XP100 is a passive cabinet that can be used with any power amplifier rated at

up to 250 watts into 8 ohms. It requires no power and provides dual Speakon™

and 1/4" connectors that allow multiple XP100s to be daisy-chained where

extended coverage is required.

• The XP200 contains dual power amplifiers and an active crossover. Operating in

a biamped configuration, one power amp drives the low frequency section

with 150 watts of power and the other drives the high frequency section with

50 watts of power. The active crossover uses an advanced Linkwist-Riley constant

phase filter that provides a steep rolloff of 24 dB per octave to reduce sonic dis

tortion at the crossover frequencies. Dual balanced XLR connectors allow daisy-

chaining of multiple Expedition Pro enclosures, and a switchable limiter circuit

assures a clean output even when you’re pushing the XP200 to maximum levels.

In addition, there are three stages of speaker protection, including relay switching

for power on and off.

• The XP300 includes all the features of the XP200, and adds a flexible four-channel

stereo mixer that provides two monophonic and one stereo mic/line channels

with dual XLR and 1/4" connectors. In addition, separate dual phono connec

tors allow you to hook up an external cassette or CD player. Each mixer chan

nel includes two-band equalization and independent volume control,



SAMSON

ENGLISH

I' am trying to find a service manual for the xp200 without success. I have two units that were not plugged for two years and will no take a charge. How do I replace the batter? It looks like the case comes apart by removing the screws around the outer perimeter ,one at the top and two underneath at the bottom. Are there any special precautions when separating the front from the main body? Submitted on 13-9-2022 at 01:36
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samson Expedition Pro XP 200 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 10,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samson Expedition Pro XP 200 Manual

Product: