629792
55
Zoom out
Zoom in
Previous page
1/76
Next page
Optionales Zubehör RB2030 AUFLADBARE BATTERIE
2 Entfernen Sie mit einem Kreuzschraubendreher die beiden Schrauben und den Deckel des Batterie-Anschlusses.
Anmerkung: Heben Sie den Deckel und die Schrauben für eine weitere Verwendung auf. Entfernen Sie die beiden
M4 x 10 Schrauben der unteren Rückwand (sie werden in Schritt 6 wieder verwendet) und die erhöht angebrachte
Rändelschraube (Abb. 1).
3 Richten Sie die Batterie wie in Abb. 2 aus und setzen Sie ihre “Beine” wie in Abb. 3 in die Unterseite des XPL200 oder
XPL300.
4 Schließen Sie das Batterie-Versorgungskabel wie in Abb. 3 an.
WICHTIG! Sowohl die Anschsse am
Versorgungskabel (der Batterie) als auch die des Anschluss-Steckers (an der Box) sind eindeutig gekennzeich-
net. Achten Sie darauf, dass Sie das Kabel richtig anschlien, da andernfalls in der Batterie ein Kurzschluss
erzeugt wird, der zu einem Brand und/oder Ausfall des internen Versrkers führen kann.
5 Heben Sie die Batterie an ihren Platz und drehen Sie die beiden M4 x 14 Schrauben in die beiden äußeren Löcher
und die beiden M6 x 12 Schrauben in die inneren Löcher des Batterierands. Sichern Sie mit den beiden M4 x 10
Schrauben (aus Schritt 2) die Unterseite der Batterie an der Box.
Batterie laden
Bevor Sie die RB2030 verwenden, muss die Batterie vollständig aufgeladen sein. Nachdem Sie die
Installationsanleitungen befolgt haben, verbinden Sie den XPL200 oder XPL300 mit einer Steckdose und schalten Sie
das Gerät ein. Die Batterie benötigt beim ersten Mal 8 Stunden, um sich vollständig aufzuladen. Danach kann sie in 4
Stunden vollständig geladen werden. Die Batteriepegel-Anzeige auf der Rückseite des XPL200 oder XPL300 zeigt nur
dann einen Pegel an, wenn das Netzkabel nicht angeschlossen ist.
WICHTIG: Die RB2030 Batterie muss nach jedem Einsatz vollständig aufgeladen werden.
"ATTERIE
6ERSORGUNGSKABEL
"ATTERIE
!NSCHLUSS
Abb. 3 Abb. 4
DEUTSCHE
51
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Expedition Express EXL250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Expedition Express EXL250 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 10,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info