630000
17
Zoom out
Zoom in
Previous page
1/28
Next page
15
The HP / LP Switch Has Four Clicks!
Click Menu Function Value
1 Lowpass high Cut Filter
2 kHz - 20 kHz
2 Lp-Order Filter Slope 0, 6, 12, 18 per Octave
3 Highpass low Cut Filter
20 Hz - 200 Hz
4 HP-Order Filter Slope 0, 6, 12, 18 per Octave
Press the HP / LP switch so that the yellow LED is lit.
Engage the effect by pressing the IN / OUT switch
until the yellow LED lights.
To set the High-pass filter press the HP / LP switch
until the LCD display reads; High-pass.
Now, use the Data Wheel to set the frequency from 20
Hz to 200 Hz.
Press the HP / LP switch again and you will see the
menu to set filter Order, or slope. The menu will read
HP-Order.
Use the Data Wheel to choose a slope of either 6dB,
12dB, or 18 dB.
Note:
If you want to use the Low Pass filter but not the High
Pass filter set the Low Pass filter slope to 0 dB.
To set the Low-pass filter, press the HP / LP switch
until the LCD display reads; Low-pass.
Now, use the Data Wheel to set the frequency from 20
Hz to 20 kHz.
Press the HP / LP switch again and you will see the
menu to set filter Order, or slope. The menu will read
LP-Order.
Use the Data Wheel to choose a slope of either 6dB,
12dB, or 18 dB.
Note:
If you want to use the High Pass filter but not the
LowPass filter set the High Pass filter slope to 0 dB.
Using the LIMITER for Basic Speaker Protection
In order to help you protect your speaker system, the
D3500 employs a digital Limiter. When engaged, the
digital Limiter will prevent signals from reaching outputs
levels over a desired point. The D3500’s Limiter has a vari-
able Threshold level, which is the point the limiter circuit
begins to attenuate the system. The Limiter also has a
variable Release time, which is the time the limiter circuit
takes to return the signal to the original level.
The LIMITER Switch Has Two Clicks!
Click Menu Function
Value
1 Lim. Thr. Threshold
0 to -100 dB
2
Lim. Rel.
Release Time
50 to 100
% (equiv
alent to 2 to 15 sec-
onds)
To operate the D3500 digital LIMITER follow these simple
steps.
Press the LIMITER switch so that the yellow LED is lit.
Now, engage the effect by pressing the IN / OUT
switch until the yellow LED lights.
To access the Threshold parameter, press the LIMITER
switch until you see the menu, Lim. Th. The LIMITER
Threshold can be set from –100 dB to 0 dB.
To access the Release parameter, press the LIMITER
switch until you see the menu, Lim. Rel. The LIMITER
Release time can be set from 50 to 100
% (equivalent
to 2 to 15 seconds).




Operating the D3500




D3500_ownman_v1_2.indd 15 9/4/05 5:20:12 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson D-3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson D-3500 in the language / languages: English as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info