630000
6
Zoom out
Zoom in
Previous page
1/28
Next page
4
1 FILTER SELECT switch
– Each of the 30 filters can be
activated and set up by pressing the Filter Select switch.
2 DYNAMIC LED
When the Red LED is lit, the filter is set
to Dynamic Mode.
3 RESONANCE LED
– Green LED indicating the filter is set
to Resonance Mode.
4 ACTIVE LED
When the Amber LED is lit, the filter is set
to Actice Mode.
5 FREQUENC
Y
– Control knob, with LED light-ring posi-
tion
indicator
, used to set the center frequency of the
indicator, used to set the center frequency of the indicator
selected filter from 20 Hz to 20 kHz.
6 BANDWIDTH
This control knob, with L
ED light-ring
position
indicator
, is used to adjust filter width and can
indicator, is used to adjust filter width and can indicator
be set from 1/60th of an octave to 1 octave.
7 GAIN
– Control knob, with L
ED light-ring position
indicator
, used to adjust the gain from +16 dB boost to
indicator, used to adjust the gain from +16 dB boost to indicator
–48dB cut.
8
LEVEL METER
- Twelve segment LED meter display the
input level and overload.
9 LCD DISPLAY
– Backlit display that shows the various
parameters under control by the operating system.
10 DATA WHEEL
– Rotary encoder for entering parameter
values.
11 BYPASS switch
When the red LED is on, the digital
equalizer, as well as all the on-board digital processing
effects, are defeated.
12
A / B switch
– Used to switch between your modified
program, and the last program that has been loaded or
stored into memory.
Controls and Functions
Front Panel Layout
13 LEFT switch
– Assigns the Left (CH1) digital equal-
izer to the physical controls.
14
LINK switch
– Used to control the left and right
(CH1 and CH2) equalizer simultaneously with the
one set of physical controls.
15 RIGHT switch
- Assigns the Right (CH1) equalizer to
the physical controls.
16 RESET SWITCH
– Used to reset the selected filters
to 0 Gain.
17 FBM (Feedback Managment) switc
h
– Used to
set
Sensitivity, Hold and Release for
the automatic
feedback filter.
18 EQ switch
-- When engaged, the amber LED will illu-
minate indicating that the EQ parameters are under
control and displayed in the LCD window.
19 GATE switch
- Used to access the automatic GATE
control parameters. When selected, the amber LED
will illuminate and the associate values for the digi-
tal noise gate will be displayed in the LCD window.
20 DELAY switch
- When engaged, the amber LED will
illuminate indicating that the DELAY parameters are
under control and displayed in the LCD window.
21 ENHANCE switch
- When engaged, the amber LED
will illuminate indicating that the ENHANCE param-
eters are under control and displayed in the LCD
window.
22 HP / LP switch
– LED switch used to access the
HI PASS and LOW PASS control parameters. When
selected, the amber LED will illuminate and the
associated values for the high and low pass filters
will be displayed in the LCD window.











                  

D3500_ownman_v1_2.indd 4 9/4/05 5:20:01 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson D-3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson D-3500 in the language / languages: English as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info