629999
23
Zoom out
Zoom in
Previous page
1/32
Next page
21
Using the D1500 with the D2500
In order for the D1500 and D2500 to communicate with
each other it is necessary to configure the MIDI param-
eters so that the units are communicating properly. Follow
the steps below to configure the MIDI parameters for
communication between one D1500 RTA and one D2500
Digital EQ. Let's start with the D1500:
Press the MIDI switch until you get to the “MIDI” screen
and use the DATA WHEEL to select “ON.
NOTE: You may notice the MIDI light flashing which is indi-
cating that you are editing the MIDI set up.
Now, press the MIDI again and set the MIDI CHANNEL
number to “1”.
Press the MIDI switch once again and use the DATA
WHEEL to set the “OMNI” mode to OFF”.
Next, you need to configure the D1500 to transmit and
receive MIDI System Exclusive messages, so press the
MIDI switch again and use the DATA WHEEL to set the
SysEx to select T+R”.
Press the MIDI switch once again and use the DATA
WHEEL to set the “Pgm Ch.”(MIDI Program Change) to
“OFF”.
Once you have all the parameters set, press the STORE
button to save the changes to the MIDI set up.
Now, Let's set up the D2500.
Press the D2500's Global switch a few times until the
display reads: F.R.
Now,
turn the Data Wheel until the dispay reads +/-12
dB.
Press the D2500's Global switch a few times until the
display reads: F.Bw.
Then,
turn the Data Wheel until the display reads 1/3
Oct.
Press STORE to confirm the Global changes.
Press the MIDI switch until you get to the “MIDI”
screen and use the DATA WHEEL to select “ON.
NOTE: You may notice the MIDI light flashing which is
indicating that you are editing the MIDI set up.
Now, press the MIDI again and set the MIDI CHANNEL
number to “1”.
Press the MIDI switch once again and use the DATA
WHEEL to set the “OMNI” mode to OFF”.
Next, you need to configure the D1500 to transmit and
receive MIDI System Exclusive messages, so press the
MIDI switch again and use the DATA WHEEL to set the
SysEx to select T+R”.
Press the MIDI switch once again and use the DATA
WHEEL to set the “Pgm Ch.”(MIDI Program Change) to
“OFF”.
Once you have all the parameters set, press the STORE
button to save the changes to the MIDI set up.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
CLASS B
. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MUST NOT CAUSE HARMFUL
INTERFERENCE
, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT
MAY C
AUSE UNDESIRED OPERATION.






Operating the D2500 with the D1500 RTA
The diagram above shows the MIDI connections for using a D1500 RTA with a D2500
.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson D-2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson D-2500 in the language / languages: English as an attachment in your email.

The manual is 9,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info