629999
11
Zoom out
Zoom in
Previous page
1/32
Next page
9
To change the Master Faders attenuation range follow
these steps:
Press the GLOBAL control switch until you see the M.F..
Use the Data Wheel to select the
operating range of
Master Fader.
To keep the new changes, press the STORE button and
you will exit the GLOBAL mode and both the STORE and
GLOBAL LED’s will turn off.
Selecting the Operating Mode
The D2500 can be used as a stereo device with 31-bands
of filters and the right and left side, or as a dual mono with
31-band equalizer for each of the mono signals.
It is also possible to change the operation of the equal-
izer from Stereo to Dual (two times mono). To change the
Operating Mode, follow these steps:
Press the GLOBAL control switch a few times until you
see the Md.
Use the Data Wheel to select Stereo or Dual
To keep the new changes, press the STORE button and
you will exit the GLOBAL mode and both the STORE and
GLOBAL LED’s will turn off.
Operating the D2500
Selecting the Filter Bandwidth
Thanks to the powerful onboard DSP, the D2500 has the
ability to program the equalizer filter bandwidth for either
1/4, 1/3, 1/2 of an octave, or to AUTO, which will allow
each of the 31 filters to be set to an individual bandwidth
calculated by the onboard DSP. To access the Filter band-
width settings follow these steps:
Press the GLOBAL control switch
a few times
until you
see the F.B.W. .
Use the Data Wheel to select 1/2, 1/3 or 1/4 of an octave,
or to AUTO.
To keep the new changes, press the STORE button and
you will exit the GLOBAL mode and both the STORE and
GLOBAL LED’s will turn off.
Selecting the Fader Range
It is also possible to change the fader range of the equal-
izer filters from 3dB, to 6dB or 12dB. To change the
Frequency Range, follow these steps:
Press the GLOBAL control switch
a few times
until you
see the F.R.
Use the Data Wheel to select +/-3dB, to
+/-
6dB or
+/-
12dB.
To keep the new changes, press the STORE button and
you will exit the GLOBAL mode and both the STORE and
GLOBAL LED’s will turn off.
Setting the Range of the Master Fader
You can set the D2500’s Master Fader can be set to operate
in the following ranges;
+12/-12dB,
or
+12/-120dB
. The
Master Fader attenuation range is always either the same
as the filter faders, or it can be set to -120dB. The Master
Faders boost range will always be equal to the boost range
of the filter faders.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson D-2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson D-2500 in the language / languages: English as an attachment in your email.

The manual is 9,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info