629999
6
Zoom out
Zoom in
Previous page
1/32
Next page
4
1 FADER
– 45mm LED fader for each of the 31 frequency
bands, which can be software set for +/- 12 dB or +/- 6 dB
,
or
+/- 3 dB
of cut and boost.
2 ABOVE NULL LED
– Red LED indicating the fader is
below the null
(matching)
point.
Note:
the null point
is the exact location where the fader's
physical
postion
physical postion physical
matches the level of the digital filter.)
3 MASTER FADER
- 45mm LED fader for the Main Output
level, which can be software set for +/- 12 dB
or +/- 3 dB
or +/- 6 dB of cut and boost, as well as
+12/- 120 dB
or
+
6
/- 120
dB
or +3 dB
/- 120
.
4 LCD DISPLAY
– Backlit display that shows the various
parameters under control by the operating system.
5 DATA WHEEL
– Rotary encoder for entering parameter
values.
6 BELOW NULL LED
- Green LED indicating the fader is
above the null (matching) point.
Note:
the null point is the
exact location where the fader's
physical
postion matches
physical postion matches physical
the level of the digital filter.)
7 BYPASS switch
When the red LED is on, the digital
equalizer, as well as all the on-board digital processing
effects, are defeated.
8 A / B switch
– Used to switch between the your actual
modified program, to the last program that has been
loaded or stored into memory.
9 LEFT switch
– Assigns the Left (CH1) digital equalizer to
the physical controls.
10 LINK switch
– Used to control the left and right (CH1 and
CH2) equalizer simultaneously with the one set of physi-
cal controls.
Controls and Functions
Front Panel Layout
11 RIGHT switch
- Assigns the Right (CH1) equalizer
to the physical controls.
12 MANUAL switch
When engaged, the left and
right equalizers are linked to the physical faders.
13 FBM switch
– Used to access the automatic
Feedback control parameters. When selected, the
amber LED will illuminate and the associated val-
ues will be displayed in the LCD window.
14 EQ switch
-- When engaged, the amber LED will
illuminate indicating that the EQ parameters are
under control and displayed in the LCD window.
15 GATE switch
- Used to access the automatic GATE
control parameters. When selected, the amber LED
will illuminate and the associated values for the
digital noise gate will be displayed in the LCD win-
dow.
16 DELAY switch
- When engaged, the amber LED will
illuminate indicating that the DELAY parameters
are under control and displayed in the LCD win-
dow.
17 ENHANCER switch
- When engaged, the amber
LED will illuminate indicating that the DELAY
parameters are under control and displayed in the
LCD window.
18 HP / LP switch
– LED switch used to access the
automatic HI PASS and LOW PASS control param-
eters. When selected, the amber LED will illuminate
and the associated values for the high and low pass
filters will be displayed in the LCD window.
               






6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson D-2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson D-2500 in the language / languages: English as an attachment in your email.

The manual is 9,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info