630029
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
Carbon 61 · USB/MIDI Keyboard Controller
RESET ALL
The RESET ALL function transmits the Reset All Controllers control change, #121, with a
value of 0. This message sets controllers to their initial or default state. When you press
the RESET ALL function key, the display will rst show “No (indicating that you do not
want to reset all functions). If you do want to reset all controllers, press the numerical
key 1, or rotate the DATA knob until “Yes” appears on the display. Press the ENTER key
to conrm, and all controllers will be reset instantly. If you press the ENTER key while
the display shows “No, the reset will be cancelled.
ALL NOTES OFF
The ALL NOTES OFF function sends an “all notes o message in order to stop any
stuck notes. Press the ALL NOTES OFF function key and the keyboard will instantly
send the “all notes o message, and any sustaining notes should stop.
DEFAULT
The DEFAULT function returns all of the Carbon 61 parameters to the original factory
settings. Press the DEFAULT function key, and the display will show “No” (indicating
that you do not want to reset to all default, factory settings). If you do want to reset all
controllers to their factory settings, press the numerical key 1, or rotate the DATA knob
until Yes” appears on the display. Press the ENTER key to conrm, and all controllers
will be reset instantly. If you press the ENTER key while the display shows “No”, the reset
will be cancelled.
SNAPSHOT
The SNAPSHOT function transmits all of the current controller values for the VOLUME
fader, DATA knob, PITCH BEND wheel, program number, and channel number at once,
so that you can get a full picture of your current settings. Press the SNAPSHOT key to
view these values.
Edit Mode
Keyboard Settings
ASSIGN PEDAL
Press the ASSIGN PEDAL function key to adjust the controller number assigned to the
SUSTAIN PEDAL input. The default setting is CC #64. When pressed, the current con-
troller number will ash on the display. Rotate the DATA knob, or enter the controller
number (0–148) using the numerical keys. Refer to the MIDI Continuous Controller
(CC) List on p.18 for a list of codes and their corresponding functions. Press the ENTER
key to conrm your selection. If the number input is out of range, the display will ash
“-E-” (error) for three seconds, before returning to the last set CC number.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Carbon 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Carbon 61 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info