630025

Samson Carbon 49 Manual

16
Zoom out
Zoom in
Previous page
1/96
Next page
16
Edit Mode
ASSIGN TRANS
Press the ASSIGN TRANS key to change the function that the TRANSPOSE “+” and “-”
buttons control. There are three parameters that can be assigned:
1 - Transpose 2 - Program Change 3 - MIDI Channel
When pressed, the current function number will ash on the display. Rotate the DATA
knob, or enter the control code using the numerical keys. Press the ENTER key to con-
rm the selection. If the number input is out of range, the display will ash “-E-” (error)
for three seconds, and then return to the last set function number.
Note: When the TRANSPOSE button is set to 2 (program change) or 3 (MIDI chan-
nel), the indicators will not work. In addition, when the TRANSPOSE button is set to 2
(program change), the button has an accelerate feature (when the button is pressed
and held down, the number will rapidly change so that you can access higher program
numbers more quickly).
ASSIGN FADER
Press the ASSIGN FADER function key to adjust the controller number assigned to the
VOLUME fader. When pressed, the current controller number will ash on the display.
Rotate the DATA knob, or enter the controller number (0–148) using the numerical
keys. Refer to the MIDI Continuous Controller (CC) List on p.18 for a list of codes and
their corresponding functions. Press the ENTER key to conrm your selection. If the
number input is out of range, the display will ash “-E-” (error) for three seconds, before
returning to the last set CC number.
ASSIGN KNOB
Press the ASSIGN KNOB function key to adjust the controller number assigned to the
DATA knob. When pressed, the current controller number will ash on the display. Ro-
tate the DATA knob, or enter the controller number (0–148) using the numerical keys.
Refer to the MIDI Continuous Controller (CC) List on p.18 for a list of codes and their
corresponding functions. Press the ENTER key to conrm your selection. If the number
input is out of range, the display will ash “-E-” (error) for three seconds, before return-
ing to the last set CC number.
ASSIGN MOD
Press the ASSIGN MOD function key to adjust the controller number assigned to the
MODULATION wheel. When pressed, the current controller number will ash on the
display. Rotate the DATA knob, or enter the controller number (0–148) using the nu-
merical keys. Refer to the MIDI Continuous Controller (CC) List on p.18 for a list of codes
and their corresponding functions. Press the ENTER key to conrm your selection. If
the number input is out of range, the display will ash “-E-” (error) for three seconds,
before returning to the last set CC number.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Carbon 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Carbon 49 in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info