630025

Samson Carbon 49 Manual

12
Zoom out
Zoom in
Previous page
1/96
Next page
12
Basic Operation
The Carbon 49 has two operation modes: Performance Mode and Edit Mode.
Performance Mode - In this mode, the 49 velocity-sensitive keys transmit note and
velocity information via the USB or MIDI output. The assignable controllers, pitch bend
and modulation wheels all transmit continuous controller information.
Edit Mode - In this mode, use the rst 25 keys on the keyboard to access functions and
enter numerals 0-9. The rest of the keyboard will transmit note and velocity informa-
tion. This mode is activated by pressing the EDIT button. Refer to the section on Edit
Mode (p.14) for details.
Note: The factory default for transmitting control information is channel 1. The key-
board can be assigned to transmit on another MIDI channel in Edit Mode.
Modes
Performance Parameters
OCTAVE Buttons
The OCTAVE buttons shift the octave of the keyboard up or down 12 notes at a
time, to extend the range of the keyboard. They can be used to shift the octave up
or down a maximum of four octaves. As you press these buttons, the octave shift
value will be shown on the display. The default value is 0.
The OCTAVE “-” button will shift the keyboard down one octave each time the but-
ton is pressed, and will light red when the keyboard range is below the 0 value.
The OCTAVE “+” button will shift the keyboard up one octave each time the button
is pressed, and will light red when the keyboard range is above the 0 value.
Press both OCTAVE buttons together to reset the keyboard range to 0.
TRANSPOSE Buttons
The TRANSPOSE buttons shift the range of the keyboard up or down by one semi-
tone (half-step). They can be used to transpose notes up or down by a maximum
of 12 semitones. As you press these buttons, the shift value will be shown on the
display. The default value is 0.
The TRANSPOSE “-” button will shift the keyboard down one semitone each time
the button is pressed, and will light red when the keyboard range is below the 0
value.
The TRANSPOSE “+” button will shift the keyboard up one semitone each time the
button is pressed, and will light red when the keyboard range is above the 0 value.
You can also set the TRANSPOSE buttons to send Program +/- or MIDI Channel +/-
information. Refer to the section Edit Mode (p.14) for details.
MODULATION Wheel
The MODULATION wheel is usually used to add vibrato eects to tones you are
playing. The data range of the MODULATION wheel is 0–127. The default MIDI con-
troller number is CC #1. You can assign another controller number to the modula-
tion wheel in Edit Mode. Refer to the section Edit Mode (p.14) for details.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Carbon 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Carbon 49 in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info