629765
8
Zoom out
Zoom in
Previous page
1/72
Next page
8
1. Turn the Level control on the rear panel fully
counterclockwise.
2. Set the HPF and EQ switches to the Flat
positions (figure 1).
3. Turn the Power switch OFF.
4. Connect either a line level signal from your
mixer (or other audio source) or a microphone
to the Input 1 jack or a line level signal to
the Input 2 jack on the Auro X12D/X15D
rear panel (figure 2). If using a microphone,
set the Mic/Line Switch to the microphone
position.
5. Connect the supplied power cable to the AC
Power Inlet on the back of the loudspeaker.
Plug the power cable into an AC outlet (figure
4).
Note: Always make sure that the AC outlet
is configured with the correct voltage as
indicated on the rear panel of the Auro
loudspeaker.
6. Switch the Auro’s Power switch to the ON
position.
7. Turn the Master VOL control up.
8. Run an audio signal from your mixer, or talk
into the microphone (figure 4).
9. Slowly raise the Auro’s Level control until you
have reached the desired level.
10. If the sound from the speakers sounds
distorted, or you see the FAULT indicator
blinking frequently, turn down the Input Level
control on the Auro X12D/X15D a little until
the indicator does not light. To increase the
output level of the cabinet, raise the Master
VOL Control.
Quick Start
figure 1
figure 2
figure 3
figure 4
8


Need help? Post your question in this forum.

Forumrules
1

Forum

samson-auro-x12d

Reset search

  • Hi, I have a Samson Auro X12D speaker. When I am playing music on it it is not coming out with all sounds correctly, like something is missing. This is coming from a Bluetooth receiver plugged into input 1 with a controlled connection.
    I also have a mixer but don’t know how to set this up for one speaker, do I even need it?? Hoping not as I have 2 speakers and want to use one in each dance studio with the Bluetooth receiver
    Any help is GREATLY APPRECIATED Submitted on 1-1-2022 at 07:42

    Reply Report abuse
    • I just played it and it’s like the lyrics can’t be heard, on occasion you get one or two but not really anything at all Answered on 1-1-2022 at 07:47

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Auro X12D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Auro X12D in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 12,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info