Manual Samson AirLine Synth Wireless System (page 9 of 24) (English)

623977

Zoom out

Zoom in

1/24

QuickStart

7. Now to set the channel, press and hold

the EDIT control until the display shows

the group number with three asterisks.

Next, the AR300 will automatically find the

clearest channel and you will see it in the

Channel number of the display just before

the IR SET will begin.

8. Once you see the IR SET flashing in the

LCD display, hold the transmitter, with the

bottom of the AX300 facing towards the

AR300, approximately 6 inches away from

the receiver and turn the AX300 power

switch on. The AR300 will transmit the

channel number to AX300 over infrared

light and you will see the corresponding

absolute channel number in the transmitter LCD.

8. Turn on the mixer, or unmute the channel, but keep its volume all the way down.

Begin speaking or singing at a normal performance level while observing the AF

Meter. If the AF Meter reads above “0” (indicating a Peak condition) even with the

AR300 Level control fully counterclockwise, slowly adjust the GAIN on the inside

of the AX300 to the point where the AF Meter occasionally reads “0” during the

very loudest passages, then back it off just slightly. Finally, raise the level of your

connected mixer until the desired volume is reached

9. Do a walkaround through the intended area of coverage while observing the

receiver’s RF Meter; it should continue to read about “75%”, indicating sufficient RF

reception in all areas of coverage. If not, reposition the AR300 or its antennas as

necessary.

10. If you hear any spurious noise from the receiver output when the transmitter

is turned off, use the supplied plastic screwdriver to adjust the AR300 Squelch

control, slowly turning it clockwise to the point at which the noise disappears.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samson AirLine Synth Wireless System in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samson AirLine Synth Wireless System Manual

Product: