542641
14
Zoom out
Zoom in
Previous page
1/44
Next page
The display counts down for a period of 10 minutes, with the RF Signal indicator flashing while the signal is being
transmitted. The RF address code will be generated randomly.
When the Boiler Control successfully receives a signal from the ST620 during the pairing operation, the Boiler Control
will store the generated address code into its internal memory. The LED will pulse once every second and go out if the
code is stored correctly, or pulse twice every second if this was unsuccessful. If pairing is unsuccessful then you will have
to re-start the pairing process.
Additional Information
Pressing the Reset button on the ST620 will clear the RF address code and restore the default code which will be saved
into the internal memory of the unit. Replacing the ST620 batteries will not affect the RF code setting, pressing and
holding the SYNC button on the Boiler Control will however clear the RF address code saved into the internal memory,
and switch the Boiler Control into pairing mode, as previously described.
SERVICE and CONTROL functions
If you require to use the above functions of the ST620 during this Installation, please refer to pages 33 and 34.
ST620VBC INSTRUCTION MANUAL14
Salus ST620VBC Manual 010_89 22/05/2013 11:24 Page 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salus ST620VBC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salus ST620VBC in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Salus ST620VBC

Salus ST620VBC User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info