735332
40
Zoom out
Zoom in
Previous page
1/44
Next page
AUTO MODE
Moving the slide switch to the Auto position selects the Automatic operation mode of the ST620RF. In this mode, the
Receiver will automatically receive an RF signal from the Control Centre and control the output relay.
When in Auto Mode, if RF communication between the Receiver and Control Centre is lost for less than one hour, the
Receiver remains in the same operating state it was in when the signal was lost. If the RF signal is lost for more than one
hour, the Receiver will enter Failsafe mode, and control of the Receiver output will be based on the setting of the Failsafe
mode switch.
FAILSAFE MODES
Failsafe mode has three user selectable settings – ‘On, ‘Cycle’ and ‘O.
With the Failsafe switch in the ‘On position, the output relay will be turned on, in the ‘O position the output relay will be
turned o, and in the ‘Cycle position the output relay will be operated according to a preset time sequence (on for 4
minutes and o for 11 minutes).
When changing from Auto to Failsafe mode, the LEDs will indicate the Receiver relay status as follows:
Mode LEDs Indication
On Blue and Yellow Each LED lights alternately, approx. once per second
O Yellow On
Cycle Blue On for 4 minutes, o for 11 minutes
If needed the user can switch to another mode without having to reset the ST620RF; for instance you can switch from Auto
Mode to Manual Mode with the output relay being controlled accordingly. To illustrate this point, even when switched
into Manual Mode the Receiver can still receive the RF signal from the Control Centre and once the user switches to Auto
Mode, the output relay will be controlled to turn on or turn o automatically once more.
40 ST620ROF INSTRUCTION MANUAL
SALUS ST620ROF Manual 003.qxp_89 11/08/2015 09:45 Page 40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salus ST620ROF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salus ST620ROF in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info