581197
26
Zoom out
Zoom in
Previous page
1/32
Next page
OTHER FUNCTIONS AND CONTROLS
BACKLIGHT
The backlight of the SP220 is switched on automatically whenever any of the keys are pressed. The
backlight will remain illuminated for a few seconds after the last key press, except if you are changing
settings within the Programme mode – in this case the backlight will remain illuminated throughout
the setting change process.
The backlight will not illuminate if there is no mains supply to the controller, or if the Touch Lock
feature is active.
RADIO CONTROLLED CLOCK
The SP220 time and day of the week settings are updated automatically every day (at 12:00 AM or
2:00 AM) by the use of a very accurate internal Radio Controlled Clock.
The RCC status indicator will be displayed for 10 minutes during clock updates. The indicator will
flash during the time update process, after which the indicator will be displayed for 5 minutes before
turning off.
The time and date will also be automatically updated when the SP220 is
powered up, or after the Reset Button is pressed.
If for any reason the SP220 fails to automatically update the time setting,
then the data stored in the internal memory will be used. The clock
settings can also be changed manually if required – manual settings will
be overwritten at the next successful automatic update. The RCC feature
only works when there is mains power to the controller.
NB: During the SP220 initial start up sequence the backlight will not operate due to the unit receiving
a signal from the Atomic clock. The Radio Controlled Clock built into this unit receives a signal from
the UK's Atomic clock therefore setting the time accuracy to 1 second every million years. The RCC
function also solves the issue with day light saving as the unit will update itself at 12:00am or 2am
every day, therefore when the time changes twice a year, so will the SP220. Please be aware that the
signal received by the RCC is similar to a mobile phone signal; some areas will not obtain a signal. If
you happen to be located in a poor RCC reception area, then the time and date can be set manually
in the settings menu.
SP220 INSTRUCTION MANUAL26
SP220 Manual Ver 005.qxd:Layout 1 5/1/11 10:54 Page 26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salus SP220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salus SP220 in the language / languages: English as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info