735331
13
Zoom out
Zoom in
Previous page
1/20
Next page
SETTING UP RF COMMUNICATION WITH
YOUR RECEIVER
After you have switched the above receiver
on, the thermostat will automatically pair.
WhentheredLEDstopsashing,theunithas
successfully paired.
Ifyouhavedifcultyinpairingthethermostat,
we recommend changing the address codes in
the thermostat and the receiver.
To adjust the RF address code of the receiver,
simply push up one or more of the 5 DIP switch
levers on the DIP switch bank located on the
back of the receiver (the levers are numbered
1 to 5 from bottom to top, as shown in the
picture left), and then make a note of the
setting of each switch:
To adjust the RF address code of the thermostat,
remove one or more of the jumper caps located
on the back of the unit (labelled 1,2,3,4 and
5, and shown in the picture left) so that the
jumper settings match the settings made on
the receiver:
RXVBC605, RXWBC605,RXBC605 & RXST625
To enter pairing mode press and hold
SELECT for 3 sec and the thermostat
will show 10SY (see right) once the
thermostat is in pairing mode press
and hold the sync button on the
receiver (see page 14) wait for the
red LED on receiver to change state
then press any key to cancel and
return to the main screen.
RT501RF(TX) INSTRUCTION MANUAL
13
DIP Switches
Receiver
Jumper Caps
For full instructions on pairing the RXRT505 see page 7 of the receiver manual.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salus RXST625 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salus RXST625 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info