735325
10
Zoom out
Zoom in
Previous page
1/20
Next page
Press the UP or DOWN key to adjust the hour setting to the desired value,
andconrmyourselectionbypressingtheSELECTkey.
Pressing the SELECT key allows you to step through each of the items
to be reviewed or adjusted within the programmes in the following
sequence:
Programme Function Sequence
1 6am 00 21ºC
2 8am 00 14ºC
3 4pm 00 21ºC
4 6pm 00 21ºC
5 10pm 00 14ºC
…before then allowing you to cycle back to Programme 1. Pressing the
SETkeyatanytimewillconrmthesettingandreturntotheprogramme
set selection. Each programme for all the other days of the week is set in
exactlythesameway–justrepeatthestepsshownabove,afterentering
programming mode and selecting the day you want to programme.
Regardless of which programming mode the RT501RF(TX) is set for (5/2
or 7 day), not pressing any keys for 15 seconds will automatically save any
programmingchangesandexittoNormal mode. You can also review or
change programme settings when Frost Protection is enabled.
FROST PROTECTION
To enable the Frost Protection mode, press and hold the BACKLIGHT
/ FROST button for three seconds with the RT501RF(TX) in Normal
mode. Once Frost Protection is enabled, the set point temperature is
automatically set to 5°C to provide protection from the risk of freezing.
Whenever Frost Protection is activated, the Frost Protection indicator will
ashinthesequenceshownbelow:
While Frost Protection is activated, it will override any programme
settings until the mode is changed. To turn off Frost Protection mode,
press and hold the BACKLIGHT / FROST button for three seconds.
RT501RF(TX) INSTRUCTION MANUAL
10
10


Need help? Post your question in this forum.

Forumrules
1

Forum

salus-rt501rf

Reset search

  • My Salus TR501RF thermostat comes on (wee flame) but the radiators don't Submitted on 3-12-2022 at 19:58

    Reply Report abuse
  • actual room temperature not displayed when trying to return to normal mode.it is currently stuck at 23C. waiting for 60 seconds or pressing SET key doesn't fix problem. what am i doing wrong please? Submitted on 13-12-2021 at 16:23

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salus RT501RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salus RT501RF in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info