735325
5
Zoom out
Zoom in
Previous page
1/20
Next page
The ideal position to locate the RT501RF(TX) thermostat is about
1.5maboveoorlevel.Itshouldbemountedinalocationwhere
thethermostatisaccessible,reasonablylitandfreefromextremes
of temperature and draughts. Do not mount the thermostat on
an outside wall, above a radiator or in a location where it may be
subjected to direct sunlight.
To ensure trouble free operation of the Radio Frequency (RF)
signal, always ensure that the programmable thermostat is
mounted away from any possible sources of interference (such as
radios, TV sets, computers, etc.), and is not mounted on or in close
proximitytolargemetalobjects.InstallingtheRT501RF(TX)in
enclosed areas such as cellars and basements is not recommended.
AFTER INSTALLATION
The following table shows the settings of the RT501RF(TX) programmable
thermostat after Power on, or after RESET is pressed:
Function Status After Reset or Power On
Operation Mode Normal mode
Room Temperature 22.0 °C, updated within 5 seconds
°C indicator On
Clock 12:00
AM/PM indicator AM
Day of Week indicator M
Program Default factory setting
Set Point Temperature Default factory setting
Program Number indicator 1
SET indicator Off
PROG indicator Off
Frost Protection indicator Off
Heat indicator Off
Low-Battery Warning indicator Off, updated within 5 seconds
Output Relay Off
After Power on, the thermostat will operate in Normal mode (Normal mode
is when the thermostat is displaying the room temperature):
The set point temperature is reset to the default setting
The room temperature display is updated within 5 seconds
The control process starts
The programme number is updated to indicate the running program
RT501RF(TX) INSTRUCTION MANUAL
5
5


Need help? Post your question in this forum.

Forumrules
1

Forum

salus-rt501rf

Reset search

  • My Salus TR501RF thermostat comes on (wee flame) but the radiators don't Submitted on 3-12-2022 at 19:58

    Reply Report abuse
  • actual room temperature not displayed when trying to return to normal mode.it is currently stuck at 23C. waiting for 60 seconds or pressing SET key doesn't fix problem. what am i doing wrong please? Submitted on 13-12-2021 at 16:23

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salus RT501RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salus RT501RF in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info