560196

Salter SDA-IH102BK Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
CHILD LOCK
To activate the child lock, press and hold the CHILD LOCK button for 3 secs until the
relevant LED light comes on. When child lock is activated the control buttons will not work,
preventing any accidental operation. The exception is the power button which, for safety, can
still be used to power o. To remove the child lock, press again for another 3 secs.
SAFETY ADVICE
• Induction hobs will only heat metal objects of a certain size and type (eg saucepans!)
Therefore if you were to place just your hand on the cold hob and then switch it on, there
would be no heat transfer. Even a metal ring on your finger will not become hot as it is too
small in size. However, please note carefully the following safety advice:
• During normal use in cooking with a pan, some areas of the glass hob surface will become
hot due to heat being transferred to the glass from the base of the pan. Allow the surface to
cool completely before touching, cleaning or storing the appliance.
• Never place other objects (such as metal cooking utensils) on the hob surface with the pan
as they will heat up also.
• If a pan boils over, always switch o the power immediately, remove the plug from the
mains supply and allow everything to cool completely before cleaning up the spill.
ERROR CODES
E1
Pan not suitable; Use a suitable induction pan (see suitable cookware in introduction to
cooking section, pg 3.)
E2 Overheat Protection; Switch o at the mains and allow to cool before re-use
E3 Mains voltage too high
E4 Mains voltage too low
E5 Temperature sensor error; switch o at the mains. Contact HoMedics Service if error persists
E6 Boil dry protection; switch o and check the pan has something in before restarting
CLEANING AND CARE
• Before any cleaning operation always switch o and disconnect the appliance from the
mains power supply and allow to cool completely. To keep your appliance in the best
condition; clean after every use and before storing.
• The hob must not be immersed in water. Never hold under running water.
• Wipe the external surfaces with a clean, damp cloth as required.
• Do not use harsh abrasive cleaning products or solvents.
• To avoid scratching the glass, please avoid dragging pans across the hob surface,
particularly uncoated cast iron pans which can have a rough finish.
• Never attempt to disassemble any part of the product for cleaning or any other purpose.
• Periodically, we recommended using a vacuum cleaner to remove any build up of dust
from the fan housing on the underside of the product and the cooling vent at the rear of the
product. No disassembly is required for this procedure.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter SDA-IH102BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter SDA-IH102BK in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info