465575
46
Zoom out
Zoom in
Previous page
1/46
Next page
28 29
SOLUTION
Make sure your DVB-T/TV is connected properly. Make
sure all cables are securely inserted into the
appropriate jacks.
You can't advance through the opening credits and
warning information that appears at the beginning
of movies because the disc is programmed to
prohibit that action.
The feature or action cannot be completed at this time
because:
1. The softwares of SD Card/USB restricts it.
2. The softwares of SD Card/USB don't support the
feature(e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number that is
out of range.
The SD Card/USB might be damaged. Try another
SD Card/USB
It is normal for some distortion to appear during
forward or reverse scan.
Some SD Cards/USB has sections that prohibit rapid
scanning or title and chapter skip.
If you try to skip through the warning information
and credits at the beginning of a movie, you won't be
able to. This part of the movie is often programmed
to prohibit skipping through it.
PROBLEM
No sound or
distorted sound
Can't advance
through a movie
The icon ( )
appears on
screen
Picture is
distorted
No forward or
reverse scan
Design and specifications are subject to change without notice
Specifications
Troubleshooting
If at any time in the future you should need to dispose of this product
please note that waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.(Waste
Electrical and Electronic equipment Directive)
Select this option to return to original setting. For example, if user
operates this option in DVB Mode, all the setting in DVB mode will return to
original setting.
Press Exit button to turn back to the Main Menu.
Default
Exit
System Setting Menu-Preference
:Select :Confirm
Change PIN
Default
Ae
Read
Signal system: PAL
Panel size: 7 inch
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 80 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9-12V
Power consumption: 10 W
Operating temperature: 5~40 C
Weight : 0.71kg
Dimensions (W x D x H): 210 x 160 x 38 mm
Battery Type: Li Polymer
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salora DVP7028DVBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salora DVP7028DVBT in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info