663790
9
Zoom out
Zoom in
Previous page
1/35
Next page
9
8. PROGRAMMED STATION FUNCTION
This function allows up to 10 stations to be programmed into the memory
and stored in the DAB and FM modes.
8.1 Follow the directions above to select a radio station.
8.2 Press and hold the PRESET button until the display shows the flashing
PRESET number (Fig. 8).
8.3 Press the FORWARD ( ) or BACKWARD ( ) buttons to select the preset
storage location of choice and then press the ENTER button to confirm. The
station now broadcasting has now been stored in the selected location (Fig.
9).
8.4 To store further stations, press and hold the PRESET button, and then
press the FORWARD ( ) or BACKWARD ( ) buttons repeatedly until an
empty storage location is found. Press the ENTER button to save the
station.
Fig. 8 Fig. 9 Fig. 10
8.5 To listen to a preset station, press the PRESET button once and then press
the FORWARD ( ) or BACKWARD ( ) button to select the desired preset
location. When the storage location of choice is displayed, press the
ENTER button to listen to the stored station. If the preset has not been
allocated „Preset empty‟ will be shown in the display (Fig. 10).
9. ALARM FUNCTION
This radio has a dual alarm function and it is possible to set two individual
alarm times. This alarm and may be set to wake as a buzzer tone or to a
favourite radio (DAB/FM) station. The alarm can be set in standby or during
operation.
9.1 To set the first alarm, press the ALARM 1 button to display the alarm 1
status, use the FORWARD ( ) or BACKWARD ( ) button until Alarm
status ON‟ is displayed and press the ENTER button to enter the set up
mode.
9.2 The display will now show the current time, the wake up time and the hour
digits for the wake up time will flash. Press the FORWARD ( ) or
BACKWARD ( ) buttons until the correct alarm hour is displayed.
9.3 Press the ENTER button to accept and the minute digits will now flash in
the display. Use the FORWARD ( ) or BACKWARD ( ) buttons until the
correct alarm minute is displayed.
9.4 Press the ENTER button to accept and the alarm frequency (e.g. daily,
weekdays, weekends, once) will now be displayed. Use the FORWARD
( ) or BACKWARD ( ) buttons to set the alarm frequency.
9.5 Press the ENTER button to accept and the wake up mode (e.g. BEEPER,
DAB or FM) will be displayed. Use the FORWARD ( ) or BACKWARD
( ) buttons to select the wake up mode of choice.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salora CR624DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salora CR624DAB in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 7,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info