Manual Salora 49LED9112CSW (page 32 of 91) (English, German, Dutch, French)

594921

Zoom out

Zoom in

1/91

Getting started

English - 54 -

Turning the TV on/off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

Press the Standby button, Programme +/- or a

numeric button on the remote control.

Press the side function switch on the TV until the TV

comes on from standby.

To Switch the TV Off

Press the Standby button on the remote control or

press the side function switch on the TV until the

TV switches into standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active. The

LED can also blink when you switch on the TV from standby

mode.

First time installation

When you turn on the television for the rst time,

the language selection menu appears. Select the

language you want and press OK.

The First time installation (FTI) screen appears

during rst installation. Set your preferences using

the browsing buttons. When you are through, press

OK to continue.

IMPORTANT : If you chose France or Italy as an

alternative, the PIN code menu will appear and you

will have to enter 4-digit code. You will not be able

to use 0000 as code (you are advised to write down

this code on your instruction manual so that you can

remember it when you need to use it). Enter a PIN

code and conrm by entering it again. Press the OK

button to continue.

WARNING : When prompted to enter a PIN code to

access a menu item, you have to use the code you

set during rst installation. If you forget the said code,

use the main code 4725.

Demo Mode

If you want to use your television inside a home, you

are advised to select the home mode.

If you choose the shop mode, you will have to conrm

your choice.

Choosing TV receiver mode

You will have to choose your reception mode, antenna

or cable. If you choose the ANTENNA option from

the Type of search screen, the digital television will

search for digital terrestrial broadcasts.

NOTE: You can press the MENU button to cancel.

Once all the available channels have been saved, the

list of the channels will appear on the screen. If you

nd the said channels interesting, depending on the

LCN(*), select Yes, then press OK.

Press the MENU button to exit the list of channels and

watch the television.

(*) LCN Channel number system which displays

channels in the order established by government

agencies .

Installing the cable

If you choose the CABLE option and press the

OK button on the remote control. You can set

the frequencies manually or press OK to start an

automatic search.

Note: The duration of the search will depend on the search

zone selected.

Reading media through the USB input

You can connect external hard drives (hard drives with or

without external power cables, depending on their voltage)

or a USB port to your TV through your TV's USB ports.

IMPORTANT! Backup your les before making any

connection to the TV. Note that the manufacturer

shall not be held accountable if les are damaged or

data lost. Some types of USB devices (MP3 players

for example) or USB ‘‘hard drives / memory cards’’

‘‘may be incompatible with this television. However,

you will not be able to record with NTFS formatted

disks.

If your hard drive's capacity is above 1TO, you

may experience some issues with formatting. Avoid

disconnecting your reader quickly after inserting it in

the television's USB port. This can physically damage

the USB reader and the USB device itself. Never

remove the USB while a le is being read.

First time installation - USB connections

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Salora 49LED9112CSW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Salora 49LED9112CSW Manual

Product: