Manual Salora 43UA330 (page 98 of 150) (English, German, Dutch, French)

748349

Zoom out

Zoom in

1/150

English - 22 -

Press Record button to add a timer while the Schedule

List menu is displayed on the screen. You can

Schedule

Type option as Reminder or Record. When other

parameters are set highlight Add and press OK. The

timer will be added to the list.

If any available, you can also edit or delete the timers

on this list. Highlight the timer of your choice and press

OK. Edit and Delete options will appear at the bottom

of the screen. Highlight the desired option and press

OK. After you edited a timer you can choose either

to replace it or add it as a new timer. If you choose

the Replace option, the timer will be saved with the

new settings. If you choose the Add option, the timer

will be added to the list as a new timer. Highlight

Replace or Add according to your preference and

press OK to proceed. When you choose to delete



the screen. Highlight Yes and press OK to delete the

selected timer.

A warning message will be displayed if the time

intervals of two timers overlap. You can not set more

than one timer for the same time interval.

Press EXIT button to close the Schedule List.

CEC

With CEC function of your TV you can operate a

connected device with the TV remote control. This

function uses HDMI CEC (Consumer Electronics

Control) to communicate with the connected devices.

Devices must support HDMI CEC and must be

connected with an HDMI connection.

The TV comes CEC function switched on. Make

sure that all CEC settings are properly set up on the

connected CEC device. The CEC functionality has

    

might not work with all devices. If you connect a device

with HDMI CEC support to your TV, the related HDMI

input source will be renamed with the connected

device's name.

To operate the connected CEC device, select the

related HDMI input source from the Inputs menu on

the Home Screen. Or press the Source button if the TV

is in Live TV mode and select the related HDMI input

source from the list. To terminate this operation and

control the TV via the remote again, press the Source

button, which will still be functional, on the remote and

switch to another source.

The TV remote is automatically able to control the

device once the connected HDMI source has been

selected. However not all buttons will be forwarded

to the device. Only devices that support CEC Remote

Control function will respond to the TV remote control.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system). Connect the audio

system to the HDMI2 input on the TV to enable ARC

feature.

In order to activate ARC feature the Speakers option

should be set as External Audio System. You can

access this option from the TV options or TV options>

Settings>Device Preferences>Sound menu in Live TV

mode or from Settings>Device Preferences>Sound

menu on the Home Screen. When ARC is active, TV will

mute its other audio outputs automatically. So you will

hear audio from connected audio device only (same

as other optical or co-axial digital audio outputs). The

volume control buttons of the remote will be directed

to connected audio device and you will be able to

control the volume of the connected device with your

TV remote.

Note: ARC is supported only via the HDMI2 input.

The CEC functions are set to On by default. To switch



1 - Enter the Settings>Device Preferences>Inputs

menu on the Home Screen or TV options>Set

tings>Device Preferences>Inputs menu in Live TV

mode.

2 - Scroll down to Consumer Electronic Control

(CEC) section. Highlight HDMI control option and

press OK.

Google Cast

With the built-in Google Cast technology you can cast

the content from your mobile device straight to your

TV. If your mobile device has Google Cast feature, you

can mirror your device’s screen to your TV wirelessly.

Select Cast screen option on your android device.

Available devices will be detected and listed. Select

your TV from the list and tap on it to start casting.

You can get the network name of your TV from the

Settings>Device Preferences>About menu on the

Home screen. Device name will be one of the shown

articles. You can also change the name of your TV.

Highlight Device name and press OK. Then highlight

Change and press OK again. You can either select



To cast your device’s screen to the TV screen…

1. On your android device, go to ‘Settings’ from the



2. Tap on ‘Device Connectivity’

3. Tap on the ‘Easy projection’ and enable ‘Wireless

projection’. Available devices will be listed

4. Select the TV you would like to cast to

1. 

2. Tap on ‘Wireless projection’

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Salora 43UA330 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 18,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Salora 43UA330 Manual

Product: