Manual Saitek ST290 (page 4 of 16) (English, German, French, Italian, Spanish)

615629

Zoom out

Zoom in

1/16

Conditions of Warranty

1 Warranty period is 2 years from date of purchase with proof of purchase submitted.

2 Operating instructions must be followed.

3 Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction

or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by

any person or party other than our own service facility or an authorized service center, use or installation of non-

Saitek replacement parts in the product or the modification of this product in any way, or the incorporation of

this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts

of God, or any use violative of instructions furnished by Saitek plc.

4 Obligations of Saitek shall be limited to repair or replacement with the same or similar unit, at our option. To

obtain repairs under this warranty, present the product and proof of purchase (e.g. bill or invoice) to the

authorized Saitek Technical Support Center (listed on the separate sheet packaged with this product)

transportation charges prepaid. Any requirements that conflict with any state or Federal laws, rules and/or

obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or

obligations.

5 When returning the product for repair, please pack it very carefully, preferably using the original packaging

materials. Please also include an explanatory note.

6 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read

and followed the instructions in this manual.

7 This warranty is in Lieu of all other expressed warranties, obligations or liabilities. ANY IMPLIED

WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT

SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR

ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or

limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This

warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

FCC Compliance and Advisory Statement

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1 This device may not cause harmful interference, and

2 This device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Saitek Industries, 2295 Jefferson Street, Torrance, CA 902901, USA

Canada 210

Operation is subject to the following two conditions:

This device may not cause interference, and

This device must accept any interference, including interference that may cause undesired operationof the device.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Saitek ST290 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Saitek ST290 Manual

Product: