489658
32
Zoom out
Zoom in
Previous page
1/44
Next page
32 Sagem · SPFX 43 · 47 · SP 4840
EN
Connection to the Device
Connection to the Device
You can connect additional devices directly to your device.
Insert the telephone cable of the additional device into the
EXT socket (RJ-11-connection) on the device.
Externe Geräte anschließen
Direct Connection Recommended
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must be
first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addi-
tional telephones must be set to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing *5 on the additional tele-
phone or pressing o on the device.
Taking Over the Line
If you pick up on an additional telephone and the device
continues to ring or attempts to receive a fax, you can dis-
connect the device from the line. Press ** on the
additional telephone.
Changing Code
Changing Easylink Codes!
1 Press OK, 54 and OK.
2 Enter the new code for starting fax reception.
3 Confirm with OK.
4 Enter the new code for taking over the line on an addi-
tional device.
5 Confirm with OK.
Using an External Answering
Machine
For the best operation, the answering machine must be
connected to the EXT socket of the device. The numbers
of rings set for the external answering machine should be
less than the one set under
FAX RINGS by at least two.
Example of the setting:
Number of Rings of the External Answering Machine .. 1
FAX RINGS .............................................................. 3
(also see Chapter Setting the Fax Switch, page 29)
External Answering Machine
If the external answering machine has a “conserving func-
tion” (i.e. a function that changes the number of rings as
soon as new messages have been recorded), deactivate this
function.
If the external answering machine records fax signals, but
your device cannot receive faxes, inspect the connection of
the external answering machine
Notice
Direct Connection Recommended
We recommend direct connection to the device
because this allows the fax switch to function
optimally and to control the additional devices.
Notice
Connection to the First Telephone
Socket
If you have multiple telephone sockets for the
same telephone line, the device must be con-
nected to the first telephone socket.
CAUTION!
Changing Easylink Codes!
Only change the codes if it is absolutely neces-
sary. The codes must begin with * or # and
must be different.
Notice
External Answering Machine
The outgoing message must be shorter than ten
seconds. Avoid music in your announcement.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagemcom Phonefax 43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom Phonefax 43 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info