Manual Sagemcom Phonefax 43 (page 12 of 44) (English)

489658

Zoom out

Zoom in

1/44

12 Sagem · SPFX 43 · 47 · SP 4840

Receiving a Second Call

Call Waiting

During a call, you can be informed about another call by a

notification tone (= call waiting) if your telephone com-

pany offers this service. The notification tone for call wait-

ing on the device is switched off in the factory.

Receiving a Second Call

During a call, press R to accept the new call.

CLIP Prerequisite

Switching Notification Tone for

Call Waiting On/Off

1 Press OK, 42 and OK.

2 Use [, to select whether you would like to turn the

call waiting on or off.

3 Confirm with OK.

Getting Outside Line

PABX Systems

Private branch exchanges (PABX) are typical in many

offices and some households. You must dial an outside line

access code in order to get a connection to the public tele-

phone network (PSTN) from a PABX.

Inserting Outside Line Access Code

Enter the outside line access code with which you reach the

public telephone network before you enter the desired

number or select a stored entry. The outside line access

code is usually 0.

Incorrect Outsi de Line Access Code

Setting Up an Extension

Chain Dialling

You can combine and edit manually entered digits and

saved entries, before the dialling process starts. If you have

saved, for example, the telephone number prefix of an

inexpensive telephone service provider (call-by-call) as a

telephone book entry, select this entry and manually enter

the subsequent telephone number or select another saved

entry.

Insert Dialling Pause

It may be necessary to insert a dial pause in telephone

number, for example, for a direct-inward dialling number,

a sub-address or in a long distance number. Hold R

pressed (for at least two seconds).

– appears on the display.

The second part of the number is dialled only after a short

pause.

Hands-Free

Type 2 (großer Core)

(SPFX¦47)

1 Press l to dial without lifting up the handset. You will

hear a dial tone from the loudspeaker.

2 Enter the desired number using the numeric keypad or

select a saved entry. The dialling process begins imme-

diately. At this stage, any numbers that have been

incorrectly entered can no longer be changed.

Handset Near the Device

Recording a Telephone Con-

versation

Type 2 (großer Core)

(SPFX¦47)

Recording a Telephone Conversation

You can record a telephone conversation. After recording,

the ä key flashes, and you can hear the recording

like a message on the answering machine.

Recording a Telephone Conversation

1 During a call, press b. The recording begins.

2 Press b again to end the recording.

Notice

Calling Line Identification (CLIP)

For this function to work, the Caller Line Iden-

tification (CLIP) must be activated for your tel-

ephone connection (country and network

dependent). The number and name will not be

shown if the caller suppresses his number.

Notice

Incorrect Outside Line Access Code

In rare cases, the outside line access code may be

a different number or a two-digit number. For

older telephone systems, the outside line access

code can be R (= Flash). Press R to enter this

outside line access code. If the connection to the

public telephone network is not possible, con-

tact your telephone system supplier.

Notice

Connection to Private Automatic

Branch Exchange

If you operate your device permanently at an

extension, store the outside line access code with

the 96 function (see page 31).

Notice

Hands-Free

Put the handset near the device with the micro-

phone facing up in order to achieve an optimum

communication.

CAUTION!

Recording a Telephone Conversation!

You must inform your caller when recording a

telephone conversation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom Phonefax 43 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sagemcom Phonefax 43 Manual

Product: