576451
30
Zoom out
Zoom in
Previous page
1/32
Next page
7-14 SET TOPBOX ENHANCEMENT
The Set Top Box goes in this state when a new version of software is available on the network after
startup.
• Red led flashes.
• The Welcome screen is displayed.
Then a screen for “ download process ” request is
displayed.
You can delay the downloading process by pressing the
EXIT key. This process will be displayed again the next
time you switch on your Set Top Box.
When pressing the key, the downloading will be
performed:
• Then the screen becomes black,
• Flash on led.
During this mode, no action from the user is
authorized.
On completion the set top box switch on automaticaly.
After startup an information screen is displayed on
download completed. Then press and enjoy with
your last viewed program.
Note: if the download process is not correctly perfor-
med, the screen stays black and the green led flashes
indicating the cause of the failure (see table below).
When an error occurs, press any key on the remote to
continue. Then put the Set Top Box in standby mode
and switch it back on to perform downloading again.
If this operation does not succeed, unplug the main
cord and the antenna cord. Then plug them again to
perform downloading again.
DOWNLOAD PROCESS
IN ORDER TO IMPROVE THE BOX FONCTIONNALITIES
A DOWNLOAD OF SOFTWARE IS NECESSARY.
IT TAKES A FEW MINUTES.
DURING THE DOWNLOAD
YOUR SCREEN WILL BE BLACK.
DO NOT SWITCH OFF YOUR BOX
DURING THIS TIME.
TO RECEIVE THIS UPDATE
PRESS OK OTHERWISE EX TO EXIT.
DOWNLOAD PROCESS
DOWNLOAD COMPLETED
NEW S/W DOWNLOAD
IS SUCCESSFUL
TO RETURN TO YOUR PROGRAMME
PRESS OK
7. USING YOUR SET TOPBOX
23
1, 2 or 3 flashes
Reception error
Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
4, 5 or 6 flashes Flow validity errors
7 or 8 flashes
Local errors
Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
9, 10, 11 or 12 flashes Various errors
Acknowledge the message by pressing any key on the remote control. If necessary, repeat your request.
14, 15, 16 or 17 flashes Defective Set Top Box
Contact your retailer for replacement.
Error Code Origin of Error User Action
7-15 TROUBLESHOOTING
The remote control has no effect on the Set
Top Box
Point the remote control towards the terminal
Check the state and polarity of the batteries
The red front panel LED remains on
Switch terminal from stand-by to on
Ablack screen or an error message
is displayed
Perform a new auto tune
Bad reception with a portable antenna
Move the antenna away from the Set-Top-Box
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagemcom ITD 66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom ITD 66 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info