576437
47
Zoom out
Zoom in
Previous page
1/52
Next page
- 43 -
13. TROUBLESHOOTING
The remote control has no effect on the receiver.
Point the remote control towards the receiver.
Check the condition and the orientation of the batteries.
The receiver displays - -: - -.
Take the receiver out of standby by pressing .
The receiver cannot find any channel.
Check that you are in a broadcast area.
Readjust your antenna (see “Antenna signal”, page 16).
Motionless image or reception problem.
Check all connections, check the antenna and start a
programme search again (see “Automatic channel search”,
page 14).
The television set does not switch to the receiver
when it leaves standby mode.
Check that your television set is correctly connected to the TV
Scart socket (see “Connection of the receiver to the TV set”,
page 8).
If required, select the Scart input directly on your television
set.
No sound in "HOME CINEMA" mode on some
channels.
Check that you are correctly connected to a "HOME
CINEMA" amplifier via a digital link (see “Peripheral
connections”, page 9).
Black and white image on AUX output (during VCR
recording).
Check that the signal type chosen for AUX Scart output is
compatible with your VCR (select PAL on AUX SCART in the
Video Settings menu (see “Video settings”, page 14).
Some recordings are not listed in the recording list.
Check that the records are not locked. In this case they will
appear only in the full list (see “Accessing the complete list”,
page 30).
I can only zap between 2 channels during a double
recording.
In the case of a double simultaneous recording, you can only
zap between the 2 channels being recorded.
The receiver exits automatically the PIP mode
(Picture in Picture).
If a programmed recording is about to start in the next minute,
the receiver automatically exits the PIP mode in order to
prepare the recording.
When switching to standby mode, the receiver
stops the video, but the receiver display shows a
channel number instead of the current time.
If a programmed recording is about to start in the next minute,
the receiver holds so as to be ready for the beginning of
recording.
DTR6400T_6700T_9 avril 07 EN.book Page 43 Jeudi, 10. avril 2008 2:38 14
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagemcom DTR 6400T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom DTR 6400T in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info