576437
16
Zoom out
Zoom in
Previous page
1/52
Next page
- 12 -
7-2-2 User preferences
In the USER SETTINGS menu, select USER PREFERENCES.
- Banner time-out: you can set the display time of the information banner.
- Network monitoring: you can activate network monitoring. If activated, you will be informed of any
new channel or service when it is available.
- Volume bar time-out: you can set the display time of the volume indicator.
- User country: displays your geographical location.
- Recording Type (depending on software version): you can specify the mode to be applied by default
for recordings that you programme via the electronic programme guide: Programme or Timer mode.
- EPG record margin settings (Timer mode): you can programme recording margins which will be
automatically added to the recordings carried out via the electronic programme guide, in Timer mode.
You can thus programme the receiver so that it starts to record a programme before its announced
start time, and stops after its announced end time.
- Sleep Timer: you can set the receiver to automatically switch to standby mode at a specific time.
When this is set, the receiver will be put automatically into standby mode at the specified time (24H
format).
If you want to change country, please perform a reset to default settings
(see “Return to default factory settings”, page 15).
If you make a wrong selection, some services or channels may become
unavailable.
If the recording type choice does not appear among the user preferences, it
means that this mode is not available for your country. Only the fixed Timer
recording mode is available to you (see “Recording modes: Timer or
Programme”, page 27).
DTR6400T_6700T_9 avril 07 EN.book Page 12 Jeudi, 10. avril 2008 2:38 14
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagemcom DTR 6400T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom DTR 6400T in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info