Manual Sagemcom D780 (page 2 of 2) (English)

576484

Zoom out

Zoom in

1/2

D780 / D780A

C) Out of Guarantee Repairs

In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the

Authorised Sagemcom Repair Centre for a cost estimation prior to work being carried out.

In such cases, the repair and delivery costs will be invoiced to the customer.

The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United

Kingdom and Ireland

www.sgemcom.com

TERMS AND CONDITIONS FOR OTHER COUNTRIES

If, despite our best efforts, your product presents any defects, you should refer to your retailer and present

the proof of purchase that they gave you on the day of purchase.

Should any malfunctioning arise, the retailer will advise you what to do.

For the warranty to apply, you should ensure that the product was used in accordance with the instructions

for use and the purpose for use, and that you have at your disposal the sales invoice or receipt stating the

date of purchase, the name of the retailer, the reference and the serial number of the product.

No coverage shall be given under this warranty if the following conditions are applicable

x The required documents have been modified or altered in order to take advantage of the warranty.

x The manufacturing numbers, product brands or labels have been altered or made illegible.

x Interventions on the product have been made by an unauthorized person.

x The product has been subjected to abnormal or improper use.

x The product has been damaged by external factors such as lightning, over-voltage, moisture,

accidental damage, improper care as well as all Acts of God

This present warranty does not affect the consumer rights that you may have under the laws in effect in your

country

Important:

Should you return the product to the after-sales department, please ensure that you return as well all the

elements and accessories originally supplied with the product

D780 / D780A

Key tone On/Off

1. Go to the " Menu " / " Basic settings " / " Handset tones " / " Key beep ".

2. Select " On " / " Off " to activate/deactivate the beeps when you press the handset keys.

3. Press » OK « key.

Enable / Disable the beep of the handset is charging

1. Go to the " Menu " / " Basic settings " / " Handset tones " / " Parking tone ".

2. Select " On " / " Off " to activate/deactivate the beeps when you replace the handset on the

base.

3. Press » OK « key.

Modifying the language

1. Go to the " Menu " / " Basic settings " / " Language ".

2. Use or to choose the desired language. Press » OK « key to confirm your selection.

Key lock

1. Press and hold key for 1 second until the message Keys locked appears on the screen.

2. To recover to normal, press and hold

until the message Keys locked disappears on the

screen.

Activating/deactivating eco mode

1. Go to the " Menu " / " Basic settings "/ " Eco mode ".

2. Select " On " / " Off " to activate/deactivate eco mode. Press » OK « key.

SETTING THE DATE AND TIME

Time and date

1. Go to the " Menu " / " Basic settings " / " Set date/time ". Current date is displayed.

2. Enter the new date in JJ-MM-AAAA format, press » OK «.

3. Select the display format of the date (jj/mm or mm/jj), press » OK «.

4. Current time is displayed.

5. Enter the new time in the hh:mm format.

If, after entering the time, the time format is 12H, use the  or  to select "am" or "pm").

6. Select the display format of the time (12 Hours or 24 Hours).

7. Press » OK «.

In case of error use the  or.

Alarm clock

1. Go to the " Menu " / " Alarm ".

 To activate the alarm once, select " On once ".

 To repeat the alarm each day at the programmed time, select " On daily ".

 To deactivate the alarm, select " Off ".

2. Select your choice then press » OK «.

ADVANCED SETTINGS

Manage the intrusion mode

1. Go to the " Menu " / " Adv. settings" / " Conference ".

- To activate the conference, select " Auto ".

- To disable the conference, select " Off ".

2. Press » OK « to confirm the selection.

D780 / D780A

Base master PIN code

Your base station code (default setting 0000) is required to access certain security functions.

1. Go to the " Menu " / " Adv. settings " / " Change PIN ".

2. Enter your old code base using the keyboard, press » OK «.

3. Enter your new code base using the keyboard «.

4. Confirm by re-entering the new PIN, press » OK «.

5. Saved ! is displayed.

If you make a mistake, you can delete the last digit by pressing the key » Clear «.

Association of handset & base

You can register five handsets on your base. You will be able to make calls between handsets.

Calls between handsets are only possible when the handsets are registered on the

same base.

Calls between handsets (internal calls) are not charged for by the operator.

1. Press and hold

key for 5 seconds key for 5 seconds until you hear a beep.

2. Go to the " Menu " / " Adv. settings" / " Register ".

3. Enter the code PIN base (default: 0000). Press » OK «.

4. To cancel the registering of a handset, press the key » Back «.

Disassociation of a handset

This function lets you remove a handset from your base. This may be necessary if you lose a handset

or if you have already registered 5 handsets on the base.

1. Go to the " Menu " / " Adv. settings" / " Deregister ".

2. Press » OK «.

Restoring the Handset / Base Default Settings

The reinitialisation function lets you go back to the factory settings of handset and base.

1. Go to the " Menu " / " Adv. settings" / " Reset ". Confirm ? is displayed.

2. Press » OK «.

Flash timing

If you connect your telephone to a private automatic branch exchange or use it in a foreign country,

you may need to modify the flash duration in order to use your telephone correctly with regard to the

following functionalities: outgoing 2nd call, incoming 2nd call, conference call.

Contact your administrator, who will supply the appropriate time period, and proceed to the new

settings.

1. Go to the " Menu " / " Adv. settings" / " Recall time ".

Select the appropriate time period.

2. To confirm your selection, press » OK «.

Modifying the dialing mode

Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling mode:

1. Go to the " Menu " / " Adv. settings" / " Dial mode "/ " Tones " or / " Pulse ".

2. To confirm your selection, press » OK.

D780 / D780A

ANSWERING MACHINE (MODEL D780A ONLY)

The answering machine function of your telephone has two operating modes:

- Basic answering machine: an announcement indicates that you are not available.

Your correspondent cannot leave any messages.

- Recording answering machine: an announcement tells your correspondents that they can leave

you a message, which they can record after a beep.

Model D780A also gives you pre-recorded announcements in various languages and remote

consultation of your voice messages.

Disabling the answering machine

1. Go to the " Menu "/ " Ans. system " / " Answer mode ".

2. Select " Off " using the or key, press » OK «.

Activate/ Modify the answering machine mode

1. Go to the " Menu "/ " Ans. system " / " Answer mode ".

2. Select " Anwser & Record " or " Answer only " using the or key, press » OK «.

You will hear a confirmation tone.

Playing messages

1. Go to the " Menu "/ " Ans. system " / " Play messages ".

2. Press » OK « only the latter will be played, from the most recent one to the oldest one.

3. Press » Option « for the various message options. The list of options is displayed on the screen.

4. Press » Back « to leave the menu.

5. If there are no messages, the handset displays No message.

Delete all old messages

1. Go to the " Menu "/ " Ans. system " / " Delete all ".

2. Press » OK « to confirm deletion of all your old messages.

Modifying the outgoing message (OGM)

This function lets you manage your answering machine or message recorder announcements.

Recording a personal outgoing message

1. Go to the " Menu "/ " Ans. system " / " Announcement " / " Anwser & Record. "

(or " Answer only ").

2. Select " Record annc " using the or , press » OK «.

3. Clear state your announcement close to the base.

4. At the end of your announcement, release the key » OK «.

A confirmation beep is issued, the recorded announcement is played.

If you make a mistake while recording the announcement, repeat the operations described above

until you are satisfied with your announcement.

The recording of a new announcement will automatically replace the previous

announcement.

The maximum recording duration for an announcement is 180 seconds.

The recording start and end beeps are not part of your announcement.

D780 / D780A

Playing outgoing message

1. Go to the " Menu "/ " Ans. system "/ " Announcement " / " Anwser & Record ."

(or " Answer only ").

2. Select " Play annc " using the or key, press » OK «. The announcement that will be used

is broadcast. After broadcasting the announcement, your answering machine will return to

standby mode.

If no announcement is recorded, you will hear a beep.

Delete your personal outgoing message

If you delete your personal announcement, the answering machine will automatically

use one of the pre-recorded announcements.

1. Go to the " Menu "/ " Ans. system " / " Announcement " / " Anwser & Record. "

(or " Answer only ").

2. Select " Use default " using the or key, press » OK «.

3. Deleted is displayed on the screen with a confirmation tone.

The anonymous announcement corresponding to the current answering machine mode

(simple/recorder) is automatically played.

At the end of the playback, you are back to the previous menu.

Number of rings

This parameter enables you to set the number of times your telephone rings before the answering

machine answers a call. The number of rings can be set between 3 and 8, You can also select the

" Toll saver " mode.

The " Toll saver " mode automatically determines the number of rings: If there are no new messages

on the answering machine, the number of rings will be 5, otherwise the number of rings will be 3.

1. Go to " Menu "/ " Ans. system "/ " Ring count ".

2. In the list, select the desired number of rings (between 3 and 8) using the  or keyor the

"Toll saver ", mode, Press » OK «.

Remote access to answering machine

Your answering machine can be interrogated remotely. This function lets you play back your

messages and set up your answering machine from another telephone located outside your home.

Activate/deactivate remote access

1. Go to the " Menu "/ " Ans. system " / "Remote access ".

2. Use or to select " On " or " Off" .

3. Press » OK « key to confirm your selection. You will hear a confirmation tone.

Modifying the remote consultation code

1. Go to the " Menu " / " Ans. system " / " Remote access " / " Change PIN ".

2. Enter the old code remote access using the keyboard.

3. Press » OK «.

4. Enter the new remote consultation code using the keyboard and press » OK «.

5. Confirm by re-entering the new consultation code and pressing the key » OK «.

Saved ! is displayed.

If you make a mistake, you can delete the last digit by pressing the key » Clear «.

253484721A

D780 / D780A

Remote access control

To remotely access your answering machine: dial your telephone number and wait for the answering

machine to come on.

When your outgoing message is played, press

and enter your remote access code.

The code for remote access to the answering machine corresponds in fact to the

PIN Code of your Base (0000 by default).

A beep will indicate access to the answering machine. At the end of the announcement, another beep

indicates that you can operate on your answering machine.

You can carry out the following operations:

1 : previous message 7 : activate the recording answering machine

2 : listen to your messages 8 : stop the playback of the message

3 : next message

6 : delete the current message

9 : switch OFF the answering machine

Choosing your answering machine language

You can choose the language of your answering machine. The messages will be given in the

selected language.

1. Go to the " Menu " / " Ans. system " / " Voice language ".

2. Choose the desired language from the list using keys  or .

Memory status

Your answering machine has a capacity of 15 minutes (3 minutes for the OGM and

12 minutes for the messages).

When your answering machine reaches its maximum recording capacity, you can no longer receive

new messages.

BATTERIES SAFETY PRECAUTIONS

To avoid any risk of explosion:

 Make sure you have inserted battery correctly.

 Use only with 3.7V 550mA Li-Polymer type or equivalent rechargeable battery.

 Do not dispose of battery in a fire. The cell may explode.

 Check with local code for possible special disposal instructions.

 Do not burn, disassemble, mutilate or puncture. Like other batteries, of this type, toxic materials

could be released which can cause injury.

 To reduce the risk of fire or personal injury, use only battery listed in the user’s guide.

 Keep battery out of the reach of children.

 Remove battery if storing over 30 days.

GENERAL PRODUCT CARE

To keep your telephone working and looking good, follow these guidelines:

 Avoid putting the phone near heating appliances and devices that generate electrical noise (for

example, motors or fluorescent lamps).

 DO NOT expose to direct sunlight or moisture.

 Avoid dropping and other rough treatment to the phone.

 Clean with a soft cloth.

 Retain the original packaging in case you need to ship the phone at a later date.

D780 / D780A

TROUBLESHOOTING

Causes of poor reception:

 Aluminium siding.

 Foil backing on insulation.

 Heating ducts and other metal construction can shield radio signals.

 You are too close to appliances such as microwaves, stoves, computers, etc).

 Atmospheric conditions, such as strong storms.

 Base installed in the basement or lower floor of the house.

 Base is plugged into an AC outlet with other electronic devices.

 Baby monitor is using the same frequency.

 Handset batteries is low.

 You are out of range of the base.

Auto-diagnostics

Problem Solution

No display

x Make sure the batteries are properly installed and connected.

x Place the handset on the charger and fully charge the battery.

x To increase the life of your battery, you can do this every two months.

x Over time, the battery capacity may decrease slightly. Your handset

battery is fully discharged, then put the charge for at least 15 hours.

x If, despite these precautions, the problem persists, a battery replacement

is available from your dealer.

Handset does

not ring

x Make sure the RINGER setting on the handset is programmed to ON.

x You may have too many extension phones on your line. Try unplugging

some phones.

You experience

static, noise or

fading in and

out

x Is handset out of range? Move closer to the base.

x Does the base need to be relocated?

x Charge batteries.

x Make sure base is not plugged into an outlet with another household

appliance.

D780 / D780A

ENVIRONMENT

Preservation of the environment is an essential concern of Sagemcom. The desire of Sagemcom is to

operate systems observing the environment and consequently it has decided to integrate

environmental performances in the life cycle of its products, from manufacturing to commissioning,

use and elimination.

Packaging

The presence of the logo (green dot) means that a contribution is paid to an approved

national organisation to improve packaging recovery and recycling infrastructures.

To facilitate recycling, please respect the sorting rules set up locally for this kind of

waste.

Batteries

If your product contains batteries, they must be disposed of at appropriate collection

points.

The product

The crossed-out waste bin stuck on the product or its accessories means that the

product belongs to the family of electrical and electronic equipments.

In this respect, the European regulations ask you to dispose of it selectively:

x At sales points in the event of the purchase of similar equipment.

x At the collection points made available to you locally (drop-off centre, selective

collection, etc.).

In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment

Waste, which can have an effect on the environment and human health.

D780 / D780A

TERMS AND CONDITIONS FOR UNITED KINGDOM &IRELAND ONLY

In order to apply the guarantee, you should contact the Sagemcom Helpdesk or the retailer where you

purchased the equipment. Proof of purchase will be required in either case.

Please make sure that you use your equipment only for the purpose for which it was designed and under

normal usage conditions.

Sagemcom do not accept any liability for the equipment if used outside the frame of its original designed

purpose or any consequence that may arise from this usage.

Should any malfunction arise, the Sagemcom Helpdesk or your retailer will advise you how to proceed

General Guarantee conditions

Sagemcom undertakes to remedy by repair or exchange at its own convenience, free of charge for labour

and replacement parts, any defects in the equipment during the guarantee period of 12 (twelve) months or 3

(three) months for accessories, from the date of original invoice of the Equipment, where those defects are a

result of faulty workmanship.

Unless the customer has concluded with Sagemcom a maintenance contract in respect of the equipment

which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be

carried out on the equipment at the customer premises.

The customer must however return the defective equipment at his/her own expense, to the address supplied

by the Sagemcom Helpdesk or by the retailer.

In the case that a product needs to be sent in for a repair, it must always be accompanied by a proof of

purchase (which is not altered, written on or in any way made illegible) showing that the product is still under

guarantee. In the case that no proof of purchase is enclosed, the Sagemcom repair centre will use the

production date as its reference for establishing the guarantee status of the product.

Apart from all legal obligatory rules, Sagemcom, do not give any Guarantee, either implicit or explicit which

is not set force in the present section, and can not be held responsible for any direct or indirect, material or

immaterial damage, either in or out of the frame of the present guarantee.

If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory

rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair

or affect the remaining provisions or parts of this guarantee.

This guarantee does not affect the Customer statutory rights

Exclusions From Guarantee

Sagemcom shall have no liability under the guarantee in respect of

Damage, defects, breakdown or malfunction due to one or more of the following:

- Failure to properly follow the installation process and instructions for use

- An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism,

inappropriate conditions of electrical network or water damage of any nature)

- Modifications made without the written approval of Sagemcom

- Unsuitable operating conditions, particularly of temperature and humidity

- Repair or maintenance of the equipment by persons not authorised by Sagemcom

x Wear and tear from normal daily use of the equipment and its accessories

x Damage due to insufficient or bad packaging of equipment when returned to Sagemcom

x Usage of new versions of software without the previous approval of Sagemcom

x Work on any equipment or software modified or added without the prior written consent of Sagemcom

x Malfunctions not resulting from the Equipment or from software installed in user workstations for the

purpose of use of the equipment

Communication problems related to an unsuitable environment including

- Problems related to access and/or connection to the Internet such as interruptions by access

networks or malfunction of the line used by the subscriber or his correspondent

- Transmission faults (for example poor geographical coverage by radio and TV transmitters,

interference or poor line quality)

- Local network faults (wiring, servers, workstations) or the failure of the transmission network (such

as but not limited to interferences, fault or poor quality of the network

- Modification of the parameters of the cellular or broadcast network carried out after the sale of the

Product

x Normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning

due to servicing not being carried out. Servicing costs are in any event always borne by the customer.

x Malfunctions resulting from the usage of products, consumables or accessories not compatible with the

equipment

USE

D780 - D780A

Dépliant LU D780-A EN.fm Page 2 Vendredi, 1. mars 2013 4:01 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom D780 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sagemcom D780 Manual

Product: