576475
117
Zoom out
Zoom in
Previous page
1/124
Next page
English
- 14 -
4. Press and hold key for 5 seconds (after 1 minute if no Handset has started association
process the base goes back to standby).
5. Press menu key to confirm. The display shall show "WAITING" to indicate the waiting state.
6. Once the handset is registered, you will hear a confirmation tone. The handset automatically
exits the registering mode.
7. The handset number assigned automatically by the base appears on the screen.
9.3.
Disassociation of a handset
This function allows you to de-register a handset from your base.
1. Press menu. Select "advanced set " using the or key, press menu.
2. Using the or key, select "unregister ". Press menu.
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_»
is replaced by a «*». Press menu key to confirm.
4. Select the handset you want to delete (at standby state, "pls reg h/s " is displayed on the
screen).You will hear a long beep confirmation tone.
9.4.
Modifying the country
1. Press menu. Select "advanced set " using the or key, press menu.
2. Using the or key, select "country ". Press menu.
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_»
is replaced by a «*». Press menu key to confirm.
4. Using the or key, select the country where you will use the telephone. Press menu.
5. A confirmation screen appears, press menu.
The message "waiting " appears on the screen. You will hear a confirmation tone.
9.5.
Restoring the Handset / Base Default Settings
To restore the factory settings for your Handset or your Base:
1. Press menu. Select "advanced set " using the or key, press menu.
2. Using the or key, select "reset ". Press menu.
3. A confirmation screen appears, press menu.
- If you want to confirm the reset, press menu.
- To cancel the reset, press
.
4. You will hear a confirmation tone : the settings of your phone are restored to their initial
values.
9.6.
Prefix (Depending on Country)
If a PABX is used in a private network, you can program the outside call prefix.
This function sets:
- The PABX prefix number: this number will be added at the beginning of the number you
dialled.
- The number to be detected: if the number you dialled starts with the recorded sequence, this
sequence will be automatically deleted.
These two settings are not applied if number you dialled starts with "#" or "*".
1. Press menu. Select "advanced set " using the or key, press menu.
2. Using the or key, select "auto prefix ". Press menu.
3. Select "detect digit " to define the number giving you access to the outside line.
4. Select "prefix " to specify the «digits before prefix».
5. Press menu key to confirm your selection. You will hear a confirmation tone.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagemcom D27T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom D27T in the language / languages: English, Polish as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info