521833

Sagem XG762N Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
6
1) Security disabled on Access Point.
If your Access Point works without security, your wireless LAN adapter also has to be set without WEP.
Check in the main screen of the Utility that the Security Enabled check box is unchecked.
2) Security enabled on Access Point.
Beware that if you enable security on your adapter, you necessarily have to enable the type of security on
the Access Point side, as well, if you want your adapter to be able to associate with it. Go the Configuration
tab in the main screen of the Utility and activate the Security Enabled check box.
The Security window then shows up.
Here we will explain how to configure open security with WEP and WPA-PSK security with TKIP.
2.1) WEP encryption :
In the window Security, you will have to :
♦ select authentication : Open
♦ encryption is fix to WEP
♦ disable IEEE 802.1X authentication mode
♦ select the WEP type : 64 bits or 128 bits
♦ select the index key
♦ select the way to generate the encryption keys (from a passphrase or manually)
Length of the WEP keys
WEP protocol offers two levels of encryption: encryption based on 40 or 64 bits key length and more secure
encryption based on 104 or 128 bits key length.
The
40 bits keys and the 64 bits keys are the same, if their effective length is 64 bits, only 40 bits are
selected by the user, the others bits are automatically calculated. Speak about 40 bits keys or 64 bits keys is
the same thing. It is identical for the 104 and 128 bits keys.
The principle of management is identical for both 64 bits and 128 bits.
The key length has to be set at the same value on the Access Point and on the client station (Wireless LAN
adapter in our case).
Creation of the WEP keys
It is possible to manually enter the WEP key you want to use. However, this entry being rather tedious,
especially for 128 bit keys, it is possible to have them generated automatically. To do that, you will have to
enter a string of characters called "Passphrase".
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem XG762N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem XG762N in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info