521827
7
Zoom out
Zoom in
Previous page
1/19
Next page
7
Double-click this icon and the main
screen of the Utility shows up as seen
opposite.
Configuration of your Wireless LAN adapter in Infrastructure Mode
To access Internet your Wireless LAN adapter must be set in Infrastructure Mode as seen below.
In the main screen of the Utility, click the down arrow at
the right of the Network Type field and select
“Infrastructure”
Selection of the SSID
The SSID is a string of characters identifying a wireless network (it is the name of this network). To
belong to a same wireless network, the client stations and the access point (connected to the
Internet) have to use the same SSID.
If you keep the SSID field to ANY (default value), your
adapter will attach itself to the nearest access point (or to
the one sending the higher radio signal).
If you know the name of the access point you want to associate with, enter this SSID in the
corresponding field and then click “Apply” button to make the setting take effect.
The SSID can be set up to 32 characters. It is case sensitive (please take great attention to that).
Configuration of the Encryption parameters
To prevent unauthorized wireless station from accessing data transmitted over your network, the
Wireless LAN adapter offers secures data encryption, like “open” and “shared Key” authentication
with WEP (Wired Equivalent Privacy) encryption or WPA-
PSK (Wi-Fi Protected Access – Pre
Shared Key) authentication with TKIP (Temporal Key Integrity Protocol) encryption. The activation
or not of the security has to be set on the same way on the Access Point and on your LAN USB
adapter (client station).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem WL5061S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem WL5061S in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem WL5061S

Sagem WL5061S Installation Guide - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info