Manual Sagem PHOTOEASY 260 (page 11 of 284) (English, German, Dutch, French, Italian, Portuguese, Spanish)

489672

Zoom out

Zoom in

1/284

- 7 -

DEUTSCH

ESPAÑOLITALIANONEDERLANDSPORTUGUÊS FRANÇAIS ENGLISH

FIRST RIBBON INSTALLATION

Remark: use manufacturer consumables only. These are specially designed to provide

optimum print quality (Refer to paragraph Replacement of consumables,

page 28).

Remark: smart card validation is not necessary for the use of consumables supplied with the

printer (nature of supplies dependent on the model).

Switch on the printer. Wait 10 seconds for the printhead to lift, then:

1. Open the external flap located on the right-hand side of the printer.

2. Remove the protective foam.

3. Take the new ribbon out of its packaging and make sure that the film

is stretched after removing the card (A).

4. Install the ribbon in the position shown in the illustration below.

5. Insert the ribbon so that it is firmly seated in its housing. The locking

catch must be closed after insertion.

6. Close the external flap.

Warning:

never touch the film cartridge with your fingers. Make sure the cartridge is

completely inserted into the printer. Check that the green locking lever is correctly

lowered.

Remark: in the event of any difficulty, check that there are no foreign objects in the film

cartridge compartment.

Liasse AZUR_GB.book Page 7 Lundi, 23. mai 2005 11:31 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sagem PHOTOEASY 260 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 28,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sagem PHOTOEASY 260 Manual

Product: