424090
19
Zoom out
Zoom in
Previous page
1/36
Next page
19
Fax & Copy
Fax reception without paper
If there is no more paper in the feeder or if the
ink fi lm is empty, an incoming fax will be stored
in memory (storage capacity approx. 15 pages
of the Slerexe letter). If there are documents in
memory the h symbol will appear on the display
and the red indicator lamp v will fl ash. When
paper and/or an ink fi lm is inserted the fax ma-
chine will automatically print out all the stored
documents.
When a fax message is completely printed out, it
will be deleted from the memory. If the printing
process was interrupted, all fax messages that
have not been completely printed out will remain
stored. If the memory is full, further pages can
not be stored. The red indicator lamp v will
ash and the display will show MEMORY FULL.
Broadcast
This feature is very useful, and can be used when
you want to send the same document to more
than one party (Circular send).
1 Insert the document face to the front into the
document feed slot. If you want to select a
higher resolution, press RES.
2 Select M, 25 and OK. The inserted docu-
ment will be stored into the memory.
3 You now have the following options to enter
numbers into the receiver list: Either enter the
numbers using the number keypad or select a
number/group from the telephone book by
pressing a and u.
4 When you have entered the desired numbers,
press OK. The numbers are then entered in
the receiver list. Repeat the procedure until
you have entered data for max. 25 recipients.
5
To send the document press
START/COPY.
The document will be sent successively to every
party entered.
Broadcasting to a group
Along with function 25 (see chapter Telephone
/ Group) you can also use Function 46 to send
faxes to a group. However, the receiver list in
Function 46 can no longer be changed!
1 Hold the document with the print side face up
and insert it into the document feeder (max.
10 pages).
2 Press M, 46 and OK. Select the desired
group from 1 to 5 using u. Press OK.
3 Use u to select SEND FAX? and press
START/COPY. The document will be sent
to all persons in the group.
If the fax can’t be sent to one of the recipi-
ents, the fax machine will continue with the
list and retry sending the fax again. After
sending, a transmission report will be printed
automatically.
Image quality
If you want to improve the image quality you
can choose between the options FINE (for
small print or fi ne drawings) and PHOTO (for
photographs and pictures). Press RES as often
as needed until the pointer for the desired resolu-
tion lights up. After transmitting or, if there is no
document in the feed slot, after 40 seconds the
fax machine will automatically return to standard
resolution. Document transmission takes longer
in FINE mode and longer still in PHOTO
mode.
Contrast
With function 47 you can adjust the contrast
quality (brightness) for documents you want to
copy or send as a fax message, e. g. dark photos
or forms with coloured background.
1 Press M, 47 and OK.
2 With u you can choose between three dif-
ferent options:
CONTRAST: LOW
CONTRAST: medium
CONTRAST: HIGH
3 Confi rm your choice with OK.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem phonefax 2840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem phonefax 2840 in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem phonefax 2840

Sagem phonefax 2840 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info