424090

Sagem phonefax 2840 Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
14
Fax Switch
Fax switch
The built-in fax switch enables you to phone and
fax from the same telephone connection and use
additional devices. The fax switch separates fax
and voice messages. For example, it can receive
fax messages silently, i. e. without ringing to avoid
causing a disturbance.
The operating modes S and M for day and
night operation each allow you to decide on dif-
ferent modes during the day and at night, how
often the machine should ring prior to receipt
of faxes.
You may change-over the operating mode be-
tween S and M of your fax machine automati-
cally, using the timer function U.
Timer U
The built-in timer U distinguishes between day
S and night M. With the default values the fax
machine will ring during the day when it receives
fax calls and telephone calls. At night (10:00 p. m.
to 6:00 a. m.), faxes will be received without ring-
ing and telephone calls will be announced with a
quieter ring.
If the U symbol is displayed the timer is acti-
vated. To switch the timer on or off hold down
the U button for two seconds.
You can change the times when the fax machine
should switch between day S and night M:
1 Select function 33 by pressing M, 33 and
OK.
2 Enter the time at which you want your fax
machine to switch automatically to S (e. g.
08 00 for 8:00 a. m.) and confi rm with
OK.
3 Enter the time at which you want your fax ma-
chine to switch automatically to M (e. g. 23
30 for 11:30 p. m.) and confi rm with OK.
Set SM mode
Display Possible settings
total rings: 0, 1, 2, 3, 4, 5, 6, 7
fax rings: 0, 1, 2, 3, 4, 5,
manual reception
Ringer vol.: low, med, high
1 Select function 31 (Day) by pressing M and
numbers 31. Confi rm with OK.
2 Use u to set the number of rings after
which fax reception is activated if the handset
is not lifted. TOTAL RINGS: 5
3 Confi rm your entry with OK.
4 Now enter the number of ringing signals after
which the fax switch should accept the call
and separate faxes from voice messages. If
the call is a fax call the fax machine switches
to reception. Telephone calls will continue to
ring. FAX RINGS: 5
5 Confi rm your entry with OK.
6 Using u determine the ringer volume when
receiving a call. RINGER VOL.: HIGH
7 Confi rm with OK. To activate mode M
(Night) select M, 32 and OK. Repeat steps
2 to 6.
If you cannot receive any faxes, you may have
set both ringing signal numbers too high (see
points 2 and 4). Set both ringing signal num-
bers to values lower than fi ve.
Other telephones will ring for as long as the
setting under fax rings:.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem phonefax 2840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem phonefax 2840 in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem phonefax 2840

Sagem phonefax 2840 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info