651669
54
Zoom out
Zoom in
Previous page
1/70
Next page
Appendix A - SAGEM F@st™ 800 / 840 troubleshooting
SAGEM F@st™ 800 / 840 (PPP) User Guide - 288 047 975-02
Page A-2
Reproduction and communication prohibited without the written permission of Sagem Communication
This appendix is intended to help the user resolve the various fault conditions that may be
encountered when installing or using the SAGEM F@st 800 / 840. The LEDs on the front of the
modem are provided for this purpose.
A.1 Front panel LEDs
The front panel of the SAGEM F@st 800 / 840 modem has two supervision LEDs:
Marking ADSL PWR
Assignment
Presence of WAN access Presence of power + USB
Color
Green Green
Continuously
on
ADSL connection set up SAGEM F@st 800 / 840
powered up
Off
ADSL connection not set up SAGEM F@st 800 / 840 not
powered up or not detected
on the USB bus of your
computer (see section A.1.2)
Flashing
ADSL connection being set up
(see section A.1.1)
_
A.1.1 "ADSL" LED blinking
This indicates that the SAGEM F@st™ 800 / 840 is attempting to connect to the remote
connection DSLAM. The indicator remains in this state while the modem is not connected to an
active ADSL line.
ADSL connection takes less than a minute after connection to the ADSL line.
¾ If, after the connection time, the LED is still flashing:
Check that the SAGEM F@st™ 800 / 840 is connected correctly to the ADSL line (either
directly or via a splitter or microfilter).
Check that the miniature RJ11 connector pins are not dirty or damaged.
Check with your Internet Access Provider (IAP) that ADSL mode is definitely activated on
the telephone line that you want to use.
Disconnect and then reconnect the USB cable.
Restart your computer (PC or Mac).
Check with your Internet Access Provider (IAP) that the ADSL link provided on this line is
compliant with one of the three transmission standards supported by the
SAGEM F@st™ 800 / 840:
- ANSI T1.413 Issue 2 (for SAGEM F@st™ 800 only),
- G.992.1 (G.dmt),
- G.992.2 (G.lite).
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem Fast 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem Fast 800 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem Fast 800

Sagem Fast 800 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info