576462
92
Zoom out
Zoom in
Previous page
1/134
Next page
4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Page 4-46 Reproduction and communication prohibited without the written permission of E
E E
E
Parameter Description
General RIP Parameters
RIP mode
Globally enables or disables RIP.
Auto summary If Auto summary is disabled, then RIP packets will include sub-
network information from all subnetworks connected to the
router. If enabled, this sub-network information will be
summarized to one piece of information covering all
subnetworks.
Table of current Interface RIP parameter
Interface
The WAN interface to be configured.
Operation Mode Disable: RIP disabled on this interface.
Enable: RIP enabled on this interface.
Silent: Listens for route broadcasts and updates its route table.
It does not participate in sending route broadcasts.
Version Sets the RIP (Routing Information Protocol) version to use on
this interface.
Poison Reverse
A method for preventing loops that would cause endless
retransmission of data traffic.
Authentication
Required
• None: No authentication.
• Password: A password authentication key is included in the
packet. If this does not match what is expected, the packet will
be discarded. This method provides very little security as it is
possible to learn the authentication key by watching RIP
packets.
• MD5: An algorithm that is used to verify data integrity through
the creation of a 128-bit message digest from data input (which
may
be a message of any length) that is claimed to be as unique to
that specific data as a fingerprint is to a specific individual.
Authentication
Code
Password or MD5 Authentication key.
RIP sends routing-update messages at regular intervals and when the network topology
changes. When a router receives a routing update that includes changes to an entry, it updates
its routing table to reflect the new route. RIP routers maintain only the best route to a
destination. After updating its routing table, the router immediately begins transmitting routing
updates to inform other network routers of the change.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem Fast 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem Fast 1500 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info