521548
25
Zoom out
Zoom in
Previous page
1/44
Next page
25
REGISTRATION
REGISTRATION
Registering an additional
handset to a base
To register an additional handset to a base
you must:
put the handset in registration mode,
put the base in registration mode.
Once this is done, the registration (mutual
recognition of the base and the new handset)
will be done automatically (registration can
take a few seconds).
Pick up the handset which you want to
register:
On the navigator key , press or until
the REGISTRATION screen is displayed,
press OK to confirm.
Select REGISTER HS using or . Press
OK.
Select the base station number by pressing a
corresponding key (1, 2, 3 or 4).
Enter the code of the base station (0000 by
default setting) which the handset is to be
registered on to. Press OK.
The handset enters the registration mode.
Five SAGEM D20 handsets can be
logged on to one base station.
A handset can be logged on to up to
four different base stations.
On the base:
Put the base to which you want to link the
telephone set in registration mode and press
the base button for several seconds.
The green light blinks rapidly, the base is in
link mode during 3 minutes maximum.
The new handset and the base are mutually
searching for each other. The link may take
from several seconds up to three minutes.
Once the handset is registered, you will hear
an acoustic signal and the number assigned
to the handset is displayed at the left of the
screen.
The handset and the base then automatically
quit the pairing mode.
To exit the menu, press the red key .
Modifying the base preference
This function enables you to specify which
base will be used by your handset to make
calls (if your handset is registered to several
bases).
On the navigator key , press or until
the REGISTRATION screen is displayed,
press OK to confirm.
If the handset put out an irregular
acoustic signal, pairing has aborted.
Press the red key .
Disconnect and re-connect the
power supply cord of the base and
repeat the procedure.
LU 252117222C_D20V_EN.book Page 25 Mercredi, 24. août 2005 11:46 11
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem D20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem D20V in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem D20V

Sagem D20V User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info